Polycrystalline samples of (Zr 0 . 8 Sn 0 . 2 )TiO 4 have been synthesised by solid state reaction method. The effects of ball milling and the addition of ZnO (1-2 . 5 wt-%) on the microwave dielectric properties of (Zr 0 . 8 Sn 0 . 2 )TiO 4 ceramics are investigated. As the ball milling time increases, the density of the (Zr 0 . 8 Sn 0 . 2 )TiO 4 ceramics increases. The influence of ZnO as a sintering aid on the sintering temperature of (Zr 0 . 8 Sn 0 . 2 )TiO 4 is also studied. As the weight percentage of ZnO increases, the density increases up to 1 . 5 wt-% of ZnO and thereafter it starts decreasing. The dielectric constant e r and the product of quality factor Q and resonant frequency f o of TE 01d mode (Qxf o ) followed the same trend with increasing density, irrespective of whether the density increased with ball milling time or by addition of ZnO. The value of Qxf o is found to increase with increasing grain size. The microwave dielectric constant and the Qxf o values were respectively ranged from 32 to 39 . 3 and from 32 000 to 49 600 at 10 . 5 GHz for (Zr 0 . 8 Sn 0 . 2 )TiO 4 ceramics. Furthermore, the influence of the processing parameters on the microwave dielectric properties of (Zr 0 . 8 Sn 0 . 2 )TiO 4 is discussed.