The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information
SPONSORING/MONITORING AGENCY REPORT NUMBER(S)AFRL-RX-WP-TP-2011-4417
DISTRIBUTION/AVAILABILITY STATEMENTApproved for public release; distribution unlimited.
SUPPLEMENTARY NOTESThe U.S. Government is joint author of this work and has the right to use, modify, reproduce, release, perform, display, or disclose the work. PA Case Number and clearance date: 88ABW-2011-5381, 11 Oct 2011. Preprint journal article to be submitted to Proceedings of the ASME 2012 3rd Micro/Nanoscale Heat & Mass Transfer International Conference, March 3-6, 2012, Atlanta, Georgia. This document contains color. © 2011 by ASME
ABSTRACTThermal energy storage (TES) materials absorb transient pulses of heat, allowing for rapid storage of low-quality thermal energy for later use, and effective temperature regulation as part of a thermal management system. This paper describes recent development of salt hydrate-based TES composites at the Air Force Research Laboratory. Salt hydrates are known to be susceptible to undercooling and chemical segregation, and their bulk thermal conductivities remain too low for rapid heat transfer. Here, we discuss recent progress towards solving these challenges in the composite system lithium nitrate trihydrate/graphitic foam. This system takes advantage of both the high volumetric thermal energy storage density of lithium nitrate trihydrate and the high thermal conductivity of graphitic foams. We demonstrate a new stable nucleation agent specific to lithium nitrate trihydrate which decreases undercooling by up to ~70% relative to previously described nucleation agents. Furthermore, we demonstrate the compatibility of lithium nitrate trihydrate and graphitic foam with the addition of a commercial nonionic silicone polyether surfactant. Finally, we show that thermal conductivity across water-graphite interfaces is optimized by tuning the surfactant concentration. These advances demonstrate a promising route to synthesizing high energy density, high thermal conductivity TES composites.
ABSTRACTThermal energy storage (TES) materials absorb transient pulses of heat, allowing for rapid storage of low-quality thermal energy for later use, and effective temperature regulation as part of a thermal management system. This paper describes recent development of salt hydrate-based TES composites at the Air Force Research Laboratory. Salt hydrates are known to be susceptible to undercooling and chemical segregation, and their bulk thermal conductivities remain too low for rapi...