The Use of Atomic Force Microscopy to Study Crack Tips in Glass

Abstract

International Symposium on the Stress Corrosion Cracking in Structural Materials at Ambient Temperatures, Padua, ITALY, SEP, 2009International audienceThis article presents a review of the application of atomic force microscopy (AFM) to crack-tip corrosion during subcritical crack growth in glass. The two principal experimental techniques used in this type of study are (1) the direct observation of crack motion by scanning the tip of a crack during crack growth and (2) the examination of fracture surfaces once the specimen has been fractured in two. The first technique has been used to demonstrate and quantify water condensation at crack tips during subcritical crack growth and is particularly useful at low crack velocities. The second technique has been used to quantify the crack-tip corrosion process and the shape of the crack tip during crack growth. In this article, we discuss experimental results showing that the environment that develops at the tips of freshly fractured glass surfaces in soda lime glass can corrode the glass surfaces near the crack tip. Soda lime silicate glass contains mobile alkali ions that will exchange with hydronium ions in solution at the crack tip, forming a highly basic solution that is corrosive to glass. Experimental evidence for such corrosion has been obtained by the atomic force microscope, which demonstrates a displacement of the two fracture surfaces near the crack tip that can be as much as 20 nm, depending on how long the crack is held open at the fatigue limit. Despite the corrosion and displacement of the crack surfaces, the crack tip itself appears to remain sharp, suggesting that the fatigue limit in soda lime silicate glass is not due to crack-tip blunting. Most likely, the fatigue limit is a consequence of ion exchange at the crack tip, in which hydronium ions in the crack-tip solution exchange with sodium ions in the glass. As hydronium ions are larger than sodium ions, this exchange process leaves a compressive stress within the fresh fracture surface of the glass that resists crack motion and results in a stress-corrosion fatigue limit, as first proposed by Bunker and Michalske. In agreement with this mechanism, no fatigue limit is observed for silica glass, which also exhibits no ion exchange. As the crack-tip solution in silica glass is only mildly acidic, pH approximate to 5, corrosion does not occur at crack tips of this glass as supported by the observation that no crack-tip displacements are observed in silica glass by AFM. As the proposed ion exchange mechanism used to explain the stress corrosion limit in glass is at variance with the belief that the fatigue limit in glass is the result of crack-tip blunting, we discuss the possibility of plastic deformation at crack tips in glass and conclude that the available experimental data does not support such a model. At the present time, chemical reaction based crack growth theories are most consistent with the body of crack growth data that is available on glass and are probably the best explanation for the phen...

Various effects of magnetite on international simple glass (ISG) dissolution: implications for the long-term durability of nuclear glasses

“…The literature showed an increase in diffusion constants of ions, specifically Na, within the cracks when compared to the bulk glass. 53,54 The diffusion of these ions also creates a condensate region at the surface of the glass around the cracks. The pH in these regions increases compared to that of the bulk solution, which can lead to regions of increased silicate ion formation due to hydrolysis.…”

Griffith Cracks at the Nanoscale

“…This article discusses recent experimental measurements and theoretical calculations relevant to the structure of crack tips in glass. The article is a follow‐up to an earlier paper on this subject . Topics discussed include surface displacements at crack tips, water diffusion into the tips of cracks during fracture, the size of the nonlinear zones at crack tips, and environmental conditions at crack tips.…”

“…The z resolution gives near atomic resolution for the AFM. For details on how the AFM may be used to study cracks in glass, reference is recommended.…”

The Role of Chemistry in Fracture Pattern Development and Opportunities to Advance Interpretations of Geological Materials

“…To date, most fundamental research on subcritical crack growth has been conducted on silicate and multicomponent glasses. Several reviews and key papers cover the history and development of our understanding of subcritical crack growth in glass (Ciccotti, ; Freiman et al, ; Pallares et al, ; Wiederhorn, Fett, et al, ; Wiederhorn, Guin, et al, ; Wiederhorn, Fett, Guin, et al, , Wiederhorn, Fett, Rizzi, et al, ; Wiederhorn et al, ). Milligan () and Preston () recognized that both liquid water and water vapor play a role in controlling the strength of glass.…”

“…Nanoscale subcritical cracks in glass have been studied analytically (Wiederhorn, Guin, et al, ) using transmission electron microscopy, atomic force microscopy, nuclear reaction analysis, and nuclear reflection. These approaches provide insights into the molecular fundamentals of the fracture process and lead to a deeper understanding of the mechanisms of fatigue and subcritical growth.…”