Theoretical Investigation of a Highly Sensitive Refractive-Index Sensor Based on TM0 Waveguide Mode Resonance Excited in an Asymmetric Metal-Cladding Dielectric Waveguide Structure

Abstract

This study proposes a highly sensitive refractive-index (RI) sensor based on a TM0 waveguide mode resonance excited in an asymmetric metal-cladding dielectric waveguide structure, where the analyte serves as the guiding layer. By scanning the wavelength at fixed angles of incidence, the reflection spectra of the sensor were obtained. The results showed that the resonance wavelength redshifted dramatically with increases in the analyte RI, which indicates that this approach can be used to sense both the resonance wavelength and the analyte RI. Based on this approach, we investigated the sensing properties, including the sensitivity and figure of merit, at fixed incident angles of 60° and 45°, at which the sensitivity of the sensor reached 7724.9 nm/RIU (refractive index units) and 1339 nm/RIU, respectively. Compared with surface plasmon resonance sensors, which are based on a similar structure, the proposed sensor can accept a more flexible range of incident angles and a wider sensing range of analyte RI. This approach thus has tremendous potential for use in numerous sensing domains, such as biochemical and medical analyses.

Semiconductor-nanoantenna-assisted solar absorber for ultra-broadband light trapping

“…The electric current in the GaAs nanoantennas (Fig. 2c) confirms the effectiveness of GaAs nanoantennas for this absorption enhancement [48,49]. At 1430 nm, the strong electric field mainly exists in the air slots near the nanoantennas (Fig.…”

A Tunable Triple-Band Near-Infrared Metamaterial Absorber Based on Au Nano-Cuboids Array

“…The properties of metamaterials depend on the geometry of a single cell. In recent years, people have conducted in-depth studies on the design, preparation and characterization of MAs [30][31][32][33][34][35][36]. Metamaterials have developed from microwave to terahertz, infrared and visible regions [37][38][39][40], and from single band and polarization sensitivity to multiband and weak polarization sensitivity [41][42][43][44].…”

NaBH4-Reduction Induced Evolution of Bi Nanoparticles from BiOCl Nanoplates and Construction of Promising Bi@BiOCl Hybrid Photocatalysts

“…Noble metal nanoparticles and carbon nanomaterials (e.g., carbon quantum dots, carbon nanotubes and graphene) have been widely used to modify semiconductor photocatalysts with the aim of enhancing their photocatalytic performances [25][26][27][28][29]. Due to their intriguing physicochemical characteristics, the metal and carbon nanomaterials have potential technological applications in a wide range of fields such as electronic devices, biomedicine, sensors, and wave absorption [30][31][32][33][34][35][36]. In the aspect of photocatalytic applications, they can be used particularly as excellent electron captures to facilitate the separation of photoexcited electron/hole pairs.…”