Top coal drawing law for an extra thick coal seam under the single round group drawing method

Abstract

To solve the problems of poor top coal drawing, lagging collapse, and difficulty in parallel operation of mining and drawing in extra-thick coal seams, considering the 8222 working face of the Tashan Mine as the engineering background, we first investigate the basic problems of fully mechanized top coal drawing mining in extra-thick coal seams using the single-round group drawing method (GDM). We then analyze the drawing law of top coal with different thicknesses under the single-round GDM from the aspects of top coal recovery (TCR) and drawing efficiency, coal loss mechanism, and the relation between TCR and gangue content (GC), providing a basis for determining the process parameters of GDM. Results indicate that as the top coal thickness increases, the number of drawing openings considerably influences drawing efficiency and top coal loss. And there is a notable thickness effect of the number of drawing openings on the top coal loss. There is a quantitative relationship among TCR, cumulative GC (CGC) and instantaneous GC (IGC), and CGC and TCR can be predicted based on the IGC. Consequently, theoretical analysis and numerical simulation results indicate that the optimal IGC threshold at the coal drawing openings between 31.2 and 40%. Through optimizing the coal drawing method and strictly controlling the IGC at the coal drawing openings on-site, the measured working face TCR increased from 75.25 to 90.12%, and CGC was controlled at approximately 9%. Meanwhile, the average coordination efficiency of mining and drawing time reaches 68.2%, effectively ensuring the construction of a coal mine with an annual output of 15 million tons.