Trabecular Fracture Zone Might Not Be the Higher Strain Region of the Trabecular Framework

Abstract

Trabecular bone fracture is a traumatic and localized event studied worldwide in order to predict it. During the years, researchers focused over the mechanical characterization of the trabecular tissue to understand its mechanics. Several studies pointed out the very local nature of the trabecular failure, finally identifying the fracture zone with the aim to study it separately. The complexity of the three-dimensional trabecular framework and the local nature of the fracture event do not allow the direct evaluation of a single trabecula's behavior within its natural environment. For this reason, micro-Finite Element Modeling has been seen as the best way to investigate this biomechanical issue. Mechanical strain analysis is adopted in the literature for the identification of micro fracture using criteria based on principal strains. However, it was never verified if the fracture zone is actually the zone where principal strains are concentrated. Here, we show how the maximum strain of the tissue might not be directly correlated to the fracture. In the present work, a previously validated technique was used to identify the fracture zone of 10 trabecular specimen mechanically tested in compression and scanned in micro-CT before and after the mechanical test. Before-compression datasets were used to develop 10 micro-FE models were the same boundary conditions of the mechanical test were reproduced. Our results show how the known linear behavior of the trabecular framework might not be directly related to the development of the fracture suggesting other non-linear phenomenon, like buckling or microdamage, as actual cause of the traumatic event. This result might have several implications both in micro-modeling and in clinical applications for the study of fracture related pathology, like osteoporosis.

A New Microarchitecture-Based Parameter to Predict the Micromechanical Properties of Bone Allografts

“…Nevertheless, the calculation results of the present study can be compared with literature studies performed in the elastic domain. In particular, the averaged mean strain calculated in our study was four times smaller than the applied macroscopic strain, which is consistent with the literature [21,52]. As bone remodeling is thought to be mechanically governed by variations in the strain energy density, this parameter has been the subject of several studies at the local scale [24,53].…”