Transonic Rotor/Stator Interaction Using a 3-D Linearised Unsteady Viscous Flow Model

Abstract

The paper first summarizes the forced response problem in turbomachinery and reviews various numerical methods for the simulation of unsteady flows. A particular technique, based on the linearisation of the unsteady Favre-averaged Navier -Stokes equations on three-dimensional mixedelement grids of tetrahedra, hexahedra and wedges, is described in some detail. The methodology was applied to a NGV/rotor interaction benchmark case for which detailed steady and unsteady flow measurements are available. The steady-state flow, calculated using a non-linear viscous representation, was described in detail with emphasis on features such as separation, horseshoe and passage vortices, tip leakage and shock structure since these are likely to influence the unsteady flow. The sources of unsteadiness on the rotor passage were evaluated from the steady-state solution at the NGV outlet. The disturbances were split into vortical, entropic and potential waves, the Fourier components of which were considered separately. The summation of the vortical and entropic waves was used as a rotor inlet boundary condition in order to assess the wake/rotor unsteady interaction. Similarly, potential waves were used to study the potential/rotor interaction. The results obtained from these two types of unsteady interactions were superimposed and compared with experimental data. Good qualitative and, in most cases, quantitative agreement was obtained, a finding which suggests that the unsteady flowfield generated by the relative blade motion can be considered to be a quasi-linear phenomenon for the particular HP turbine studied. Finally, the mechanisms of wake/rotor and potential/rotor interactions were studied in some detail and it was concluded that the former was strong in the crown of the blade while the latter was dominant in the leading edge region.