Treated Textile Electrostatic Properties Study

Abstract

In the article research results are presented, which aim to provide treated textile electrostatic properties study. In the article research results are presented, which aim to provide find out abilities of an anti-electrostatic treatment and binding agents for it in treatment of special textile materials and their dependance from modes of operating textile washing. Results of determine a composition and abilities of a functional impregnation; develop a method to study values of electrostatic field for tribocharging conditions of textile materialsare; experimental studies of electrostatic values of materials with functional treatment depending on operating washing modes also presented here. Study results allowed to establish efficiency of the proposed combination of anti-electrostatic active composition based on 5 % solution of dialkyldimethylammonium chloride with a binding agent with the effect to preserve the treatment in the material structure and content of which is 4 % in application of textile fabric with widely used fiber content (cotton 53 %, polyester + oil and water-proofing finish). Acrylic dispersion is stable film-forming component suitable in preserving anti-electrostatic treatment on the surface of a textile material. The research was made in Don State Technical University within the framework of State Assignment of the Ministry of education and science of Russia under the project 11.9194.2017/BCh.

Dynamics of the warp beam brake drive on a weaving loom for the production of natural silk fabrics

“…According to [5,14] we accept the stiffness of elastic filling system, C = 140 N/mm, therefore, from expression (1) the reduced stiffness to the middle radius of the driven disk Cpr = 10,1 N/mm. When the spring in the friction clutch is tightened λm = 12 mm, the friction forces are determined from expression (4).…”

Formation of research skills of students when performing laboratory work in physics: Virtual laboratory vs smartphone-based laboratory

“…A wide range of measurement methods and methods for processing their results were used. To measure the distance traveled, a direct absolute multiple static measurement was used, performed by the direct estimation method (Bezugliy and Petchenko, 2019;Cherunova et al, 2020). The essence of this method, like any measurement method, is to compare the measured value with the measure taken as a unit.…”

Half-timbered houses of the Tudor and Elizabethan periods in Britain

“…In the twentieth century, a new demand for it appeared, since such an architecture is made entirely of eco-materials and doesn't pose environmental threats. At the same time, the buildings are cosy and warm, do not have extraneous odours and completely fit into the framework of traditional architecture, and not in conflict with the environment [48][49][50][51][52][53]. Half-timbered houses (otherwisethe Prussian wall) in England were first raised by the invited Germans, and it is reflected in the name; then the local builders adopted this technique.…”