Trio/hybrid fiber effect on the geopolymer reinforced concrete for flexural and shear behavior

Abstract

Geopolymer concrete (GC) is an innovative and sustainable type of composite resulting from the chemical reaction between waste materials containing and alkaline activators. The researchers have been focused to reduction of the greenhouse‐gas release, especially during the production of cement. Although numerous studies have been conducted on alkali‐activated cement or GC at the material level, there is limited research in the literature on the structural performance of reinforced GC members. The aim of this study is to investigate the effect of fiber combination on the shear and flexural performance of RC beams with maximum and minimum reinforcement ratio. To investigate the shear and flexural behavior of GC beam, four‐point and three‐point tests were performed on 12 GC with hybrid fibers, 4 GC with trio fibers, and 2 GC fiber‐free as references beams. The test parameters were the combination of fibers (steel, glass, carbon, and basalt), the longitudinal reinforcement ratio, and loading type. The key test results include the load‐deflection behavior, characteristics of the cracks, the effect of fiber type on the shear and flexural performance, ductility and stiffness properties, microstructure, the strain in the concrete, and the bars and code predictions. The test results showed that as expected, reducing the longitudinal reinforcement ratio decreased the strength, but the decrease in strength was tolerated by using different types of fibers. The use of trio fibers in beams under bending increased the strength capacity, considerably. Finally, the capacity prediction performance of current codes, that is, GB50010, EuroCode‐2, TS500, and ACI318, were also examined, and the calculations resulted that the current code equations had a percentage error of approximately 25% and 82% on average for flexural and shear, respectively, although EuroCode‐2 equations performed slightly better.