Two- and three-body abrasive wear behaviour of different heat-treated boron alloyed high chromium cast iron grinding balls

Effects of silicon content on the microstructure and corrosion behavior of Fe–Cr–C hardfacing alloys

“…The onset of solidification coincided with the formation of primary austenite while the binary eutectic phase of austenite and Cr 7 C 3 transformed from the remaining melt. At room temperature and in the as-solidified condition, both types of austenite (primary and eutectic) were present as retained austenite [32][33][34][35][36][37][38][39]. The details of microstructural investigation of the samples coated by FeCrC powders are given in Ref.…”

Effect of Dilution on Wear Performance of Plasma Transferred Arc Deposited Layers

“…In addition, the matrix hardness also plays an important role during microploughing. 16,17) According to the results of this study, it is supposed that both the matrix hardness and eutectic fraction change by dilution are significant factors in abrasive wear.…”

Machinability of bimetallic bearings using cemented carbide tools: evaluation of the wear mechanisms

“…The adhered layer is frequently carried by the burr flow, taking with it also some material from the tool. The parallel channeling found, are a consequence of the abrasion caused by the silicon carbides, which are very hard materials [12,13], found in the gray cast iron.…”