Uncertainty Evaluation in Multistage Assembly Process Based on Enhanced OOPN

Abstract

This study investigated the uncertainty of the multistage assembly process from the viewpoint of a stream of defects in the product assembly process. The vulnerable spots were analyzed and the fluctuations were controlled during this process. An uncertainty evaluation model was developed for the assembly process on the basis of an object-oriented Petri net (OOPN) by replacing its transition function with a fitted defect changing function. The definition of entropy in physics was applied to characterize the uncertainty of the model in evaluating the assembly process. The uncertainty was then measured as the entropy of the semi-Markov chain, which could be used to calculate the uncertainty of a specific subset of places, as well as the entire process. The OOPN model could correspond to the Markov process because its reachable token can be directly mapped to the Markov process. Using the steady-state probability combined with the uncertainty evaluation, the vulnerable spots in the assembly process were identified and a scanning test program was proposed to improve the quality of the assembly process. Finally, this work analyzed the assembly process on the basis of the uncertainty of the assembly structure and the variables of the assembly process. Finally, the case of a certain product assembly process was analyzed to test the advantages of this method.

The Method for Risk Evaluation in Assembly Process based on the Discrete-Time SIRS Epidemic Model and Information Entropy

“…With the development of manufacturing industry and increasing customer's demand, manufacturers are facing the challenge of improving the reliability and diversity of products [1,2]. Assembly process is one of the most important parts during the manufacturing cycle and the quality of products is highly influenced by the assembly process due to the complexity in assembly manufacturing system [3,4]. Latent defects in assembly process are easily triggered to dominant defects when environment conditions change, which could lead to the phenomenon that defect emergence often breaks out.…”

Screening Scheme Evaluation of the Assembly Process Based on the Stress-Strength Model and Defect Stream Analysis

“…A defect that is either too small or is located in a position that does not cause an immediate failure is called a latent defect. A latent defect may or may not cause failure in the field, depending on the operation time, environmental condition and processes [3].…”