Understanding the Effect of Knots on Mechanical Properties of Chinese Fir under Bending Test by Using X-ray Computed Tomography and Digital Image Correlation

Abstract

Knots in wood have a substantial impact on both the physical and mechanical properties of derived products. It is necessary to study their effect on the mechanical properties of wood and understand the mechanisms behind the effect. The modulus of elasticity (MOE) and modulus of rupture (MOR) of specimens without knots and with knots are measured using the three-point bending test. The size and position of knots are recorded. The specimens with knots are analyzed according to failure not at knots and failure at knots. For specimens with failure at knots, they are further divided into two sub-groups, i.e., failure around knots (FK-A) or failure in knots (FK-I).