Urea as a Hydrogen Bond Producer for Fabricating Mechanically Very Strong Hydrogels

Abstract

Hydrogen bonding plays a very important role in the construction and stabilization of natural and synthetic polymeric materials. Urea is generally considered and used as a hydrogen bond breaker. No successful examples have been provided to show that it can function as a strong hydrogen bond producer to fabricate polymeric materials with excellent mechanical properties. Here, we show that hydrogen-bonded poly(vinyl alcohol) (PVA)–urea hydrogels with extraordinary mechanical properties can be prepared by drying PVA–urea solutions at an elevated temperature and then swelling in water. The drying process leads to the close contact of PVA chains and urea molecules and hence enables the formation of multiple hydrogen bonds between a urea molecule and neighboring PVA chains, i.e., urea functions as a bridging molecule. The tensile strength and elastic modulus of the PVA–urea hydrogels reach 23.8 and 11.28 MPa, respectively, which are much higher than those of neat PVA hydrogels with similar water contents. Structural characterizations prove that the added urea is mostly retained in the hydrogels and strong hydrogen bonding is formed between PVA and urea. The hydrogen bonding and PVA crystallites provide the hydrogels with strong interactions, and the reversible formation and breakage of hydrogen bonding endow the hydrogels with an efficient energy-dissipating mechanism, leading to the excellent mechanical properties of the hydrogels. This study overturns the common perception that urea can only be used as a hydrogen bond breaker rather than a producer, and it provides new strategies for the preparation of more polymeric materials with excellent mechanical properties.

Superhydrophilic Poly(2-hydroxyethyl methacrylate) Hydrogel with Nanosilica Covalent Coating: A Promising Contact Lens Material for Resisting Tear Protein Deposition and Bacterial Adhesion

“…This phenomenon was similar to the TEOS-modified clay system, where Si–O–Si covalent bonds were formed on the surface of clay platelets . However, it was different from the poly­(vinyl alcohol) (PVA)–urea hydrogel system, where a drying treatment at ∼60 °C just enhanced the hydrogen bonding due to the close contact of PVA chains and urea molecules. That was because the amide bond in urea with a lower reactivity than hydroxyl group was hard to dehydrate with the hydroxyl group in PVA by a warm drying, unless in the presence of oil palm ash or methanol .…”

Strong, Antifatigue, and Ionically Conductive Organogels for High-Performance Strain Sensors

“…With the increase of the shear strain, G ″ is larger than G ′, the originally stable hydrogen bonding is destroyed, and thus ICOs change from elastic to viscoelastic and a final viscous state. Although the fracture strain for ICOs is very large, the critical shear strain of the transition from the elastic to viscous state during the rheology tests is much lower, which is generally observed in physically cross-linked gel systems. − …”

Bioinspired Mechanically Robust and Recyclable Hydrogel Microfibers Based on Hydrogen‐Bond Nanoclusters

“…[ 30 ] The C═O and N─H stretching vibration of the spinning dope was shifted to lower wave numbers significantly, owing to strengthened H‐bond interactions between polymer chains, as shown in Figure 2f . [ 34 , 35 ]…”