Using DC–DC Converters as Active Harmonic Suppression Device for More Electric Aircraft Applications

Abstract

Harmonics generated from power electronic converters will impose significant power quality challenges to the electric grid onboard future aircraft. In this paper, we propose an innovative modulation scheme that enables using a buck-boost DC-DC converter as a harmonic absorber. To demonstrate the effectiveness of the proposed method, a hybrid power generation system involving a high-speed electrical generator and a high voltage battery is introduced. The electrical generator is connected to a DC bus through an AC-DC converter and the battery to the DC bus with a DC-DC converter. For the studied hybrid power generation system, it is identified that the first carrier frequency side-band harmonic (fc-3f0) from the AC-DC converter is most relevant and is targeted for cancellation. For the control of the DC-DC converter, a new modulation technique, called equal-gate-width (EGW) modulation is proposed. It allows active control of the magnitude and phase angle of some specific harmonic components from a DC-DC converter. By properly tuning the phase angle and amplitude, the controlled harmonics can thus be used to cancel harmonics from other converters on a common DC bus. Without losing generality, the paper focuses on the development of this specific harmonic cancellation scheme and the effectiveness of our proposed methods has been demonstrated using experimental results.

Multilevel Aircraft-Inverter Design Based on Wavelet PWM for More Electric Aircraft

“…Inverters, DC-DC converters, and rectifiers stand out as the most used circuits in the aircraft power system. The primary purpose of these components is to efficiently distribute the power generated by the system to all electrical loads required for the aircraft to operate throughout its flight phases [22].…”

Model‐free adaptive control for ultracapacitor based three‐phase interleaved bidirectional DC–DC converter

“…Nowadays, ultracapacitors based bidirectional DC-DC converters (BDCs) have been widely applied in a lot of fields, such as energy storage systems, hybrid electric vehicles, aerospace power supplies, uninterrupted power supply systems, and so on. [1][2][3][4][5][6] However, the BDCs are typical nonlinear systems that can present generally complex behaviours. [7,8] That leads to extensive research on the analysis and control of BDCs.…”