Utilization of plastic waste and ProsopisJuliflora Ash in making floor tiles

Raguraman, V.; Shewale, Manisha; Korke, Pavankumar; Asalkar, Shraddha; Shinde, Nitin; Deepasree, S.; Gobinath, R.

doi:10.1016/j.matpr.2021.07.444

Cited by 5 publications

(5 citation statements)

References 23 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…25 Whereas, the high density polyethylene (HDPE) offer high degree of crystallinity for the plastic mixture, high resistance for corrosion and smooth interior surface for the tiles. 26 Several mechanical tests were measured for the manufacture tiles which are important for fixing their specifications and accordingly it can be determine their construction uses. The compression strength (CS) and cold work CW(%) of the prepared tiles were examined using the machine in Figure1 and the mechanical results Table2 shows the weight percentages of different polymers in the tile mixture beside the tile form have a significant effects on CS and CW(%).…”

Section: Discussionmentioning

confidence: 99%

Composite Construction Tiles Manufactured from PET and Other Waste Plastics Reinforced with Polycarbonate and Study their Mechanical Properties

Ahmed,

Jabrail

2024

Pharmacogn J.

View full text Add to dashboard Cite

Section: Discussionmentioning

confidence: 99%

Composite Construction Tiles Manufactured from PET and Other Waste Plastics Reinforced with Polycarbonate and Study their Mechanical Properties

Ahmed,

Jabrail

2024

Pharmacogn J.

View full text Add to dashboard Cite

“…At the same time, Darweesh 10 investigated the possibility of usage of glass waste in the manufacturing of ceramic tiles, he prepared different mixtures of grog (ceramic waste), feldspar, Toshka clay, quartz, and limestone as a basic mixture and then partially replaced it with glass waste ranging from 0% to 35% fired at different temperatures ranged from 1000 to 1200 • C with 2 h soaking time. The results indicated that using glass waste improves the thermal, mechanical and physical properties of ceramic tiles, glass waste can be used in ceramic tiles with a maximum addition of 25% at a temperature of 1200 • C. Also, Raguraman et al 11 discussed the possibility of production of floor tiles using white cement, plastic and Prosopis Juliflora Ash (PJA). White cement was replaced by plastic waste and PJA with different percentages.…”

Section: Introductionmentioning

confidence: 99%

“…Also, Raguraman et al 11 . discussed the possibility of production of floor tiles using white cement, plastic and Prosopis Juliflora Ash (PJA).…”

Section: Introductionmentioning

confidence: 99%

Recycling of urban glass waste in ceramic floor tiles toward sustainability

Hamid,

Maher,

Ahmed

et al. 2024

Vietnam Journal of Chemistry

View full text Add to dashboard Cite

Around 21.7 million tons of urban solid waste are produced in North Africa and the Middle East. The amount of glass waste produced is 0.87 million tons. The amount of urban glass waste (UGW) produced in Egypt was 2280.8 tons per day. This paper aims to study the effect of partial replacement of UGW in the production of ceramic floor tiles to save the production cost and raw materials. The characteristics of the basic raw mixture of floor tiles and UGW were studied. The waste was collected, crushed and ground to be blended with the basic mixture in different percentages that ranged from 0 to 35%. The specimens were molded under uniaxial pressure followed by drying and firing at temperatures ranging from 1050 to 1120 °C. The characteristics of the fired specimens have been determined and compared with the International Standard Limits. The results showed that specimens containing waste ranging from 25% to 35%, fired at 1100 °C with a soaking time of 15 min have a modulus of rupture of 18.9 to 19.7 MPa, breaking strength of 600 to 613N and water absorption of 9.78% to 8.2% respectively that fulfilled the lowest requirements for the ISO 13006 for dry pressed tiles Group BIIb.

show abstract

“…The researchers linked these benefits to the pozzolanic properties of PJA, which promoted the formation of calcium silicate hydrate (C-S-H) gel. This gel is known for enhancing the strength and durability of cementitious materials [Raguraman et al 2021, Praveena et al 2018. In this investigation, paver blocks with varying proportions of fly ash (ranging from 0% to 25%) were subjected to compressive strength testing.…”

Section: Introductionmentioning

confidence: 99%

Influence of Utilizing Prosopis Juliflora Ash as Cement on Mechanical Properties of Cement Mortar and Concrete

2023

Global NEST Journal

View full text Add to dashboard Cite

<p>The infrastructure of the country heavily depends on the construction material concrete. The primary ingredient in conventional concrete is cement, fly ash, or another cementitious substance. The need to explore alternative sources is driven by the challenges posed by global environmental warming, which stems from widespread factors, and the escalating costs associated with the extraction of cement from quarries. To replace cement, sand, and aggregate, numerous research investigations have been conducted. The Prosopis Juliflora Ash (PJA) as an additional cementitious component in cement mortar and concrete are examined in this experimental study. The amount of cement produced in the nation will decrease if Prosopis Juliflora (PJ) ash is used as an additional substitute. It will also encourage the use of sustainable materials for concrete and mortar. The objective of this research is to investigate the impact of incorporating PJA as a binding agent on the compressive strength, split tensile strength, and flexural strength of both concrete and cement mortar. In this research, Prosopis Juliflora Ash (commonly known as Seemaikaruvelam) was employed to substitute cement in both cement mortar and concrete, with varying proportions of 10%, 20%, 30%, 40%, and 50%.According to the results of this experiment, 30% of PJA has the requisite strength qualities. This experimental investigation provides valuable insights into the mechanical characteristics of concrete and mortar incorporating PJ ash and emphasizes its potential as a sustainable alternative in the construction industry.</p>

show abstract

Utilization of plastic waste and ProsopisJuliflora Ash in making floor tiles

Cited by 5 publications

References 23 publications

Composite Construction Tiles Manufactured from PET and Other Waste Plastics Reinforced with Polycarbonate and Study their Mechanical Properties

Composite Construction Tiles Manufactured from PET and Other Waste Plastics Reinforced with Polycarbonate and Study their Mechanical Properties

Recycling of urban glass waste in ceramic floor tiles toward sustainability

Influence of Utilizing Prosopis Juliflora Ash as Cement on Mechanical Properties of Cement Mortar and Concrete

Contact Info

Product

Resources

About