Vertical distribution of black carbon and its mixing state in urban boundary layer in summer

Abstract

Abstract. The vertical distribution of black carbon (BC) as well as its mixing state is of great concern due to BC’s strong regional climatic and environmental effects. In this study, vertical measurements were conducted through a moveable container based on a meteorology tower in an urban area. A total of 112 vertical profiles (0–240 m), including the concentrations of BC, O3, NOx and the optical properties of aerosols, were obtained. Based on BC concentration, the vertical profiles could be classified into four categories: uniform, gradual decrease, sharp decrease, and sudden increase. The uniform type indicates strong vertical mixing with similar pollutant concentrations along the vertical direction. The gradual/sharp decrease types indicate stable vertical conditions with higher pollutant concentrations on the ground and lower concentrations at higher altitudes. Due to the strong radiation in summer, the vertical profiles exhibited a clear diurnal variation in which ~80 % of profiles were uniform during the daytime and ~40 %–90 % of profiles were gradual/sharp decrease types at night. O3 is an exception, and its concentration generally increases with height even under strong vertical mixing conditions. The size distribution of BC core varied slightly along the vertical direction, and the coating thickness, denoted by the shell/core ratio (Dp/Dc), of BC increased with height under stable conditions. Although the coating thickness could increase the absorption ability with an average absorption enhancement of 1.25 at 23:00, the vertical difference of Dp/Dc (2 %) was much lower than that of BC concentration (~35 %). The vertical variation of absorption ability was mainly caused by the variation of BC concentration. In addition, O3 and Dp/Dc occasionally increased during 6:00–8:00 but remained stable during 8:00–10:00. Vertical mixing and transportation from upper heights, such as the residual layer, could significantly influence the pollutant properties on the surface during early mornings. This study exhibits a continuous vertical picture of BC and its mixing state in urban areas, which would be helpful for understanding BC’s regional environmental effect.

Accurate Identification of Micro-scale Urban Functional Zones from the Perspective of Dialectical Materialism

“…However, a notable shift towards understanding urban functional zones based on POI data in cities has been noticed [30][31][32] . In recent years, the rapid growth of urban populations has exceeded the capacity of conventional horizontal expansionoriented urban planning 33 . As a result, cities are now turning to vertical spatial development as a solution, such as high-rise buildings, which may contain residential, office, and commercial services.…”