The results of a study of the kinetics of oxygen sorption from water by silver-containing nanocomposites synthesized on the base of macroporous ion exchangers with different pore sizes are presented. In the case of the Lewatit K 2620 ion exchanger, the pore size was fixed (41 nm), and for KU-23, it varied in the range from 10 to 100 nm. The nanocomposite materials Ag0⸱KU-23 and Ag0⸱Lewatit K 2620 were prepared by chemical precipitation. Using the different physicochemical methods, it was found that due to the monoporosity of the ion exchanger, the average size of the silver particles in the Ag0⸱Lewatit K 2620 nanocomposite is smaller than for KU-23. This effect contributes to the intensification of oxygen absorption and is proved by the results of studying the rate and degree of oxygen sorption by nanocomposites in the entire studied range of their capacity on metal. On the other hand, the polyporosity of the KU-23 ion exchanger, due to its better diffusion permeability, contributes to the more uniform distribution of silver over the volume of nanocomposite grains and ensures the steady state of the sorption process. Based on the presented experimental results, the synthesized silver-containing nanocomposites can be recommended as multifunctional materials with bactericidal action and catalytic effect for different industrial applications, including the deep removal of dissolved oxygen in the production of ultrapure water for energetics and microelectronics.