Waterflood Management Using Hybrid Approach of Streamline‐Based Interwell Flux Information and Finite Volume Reservoir Simulation

Abstract

In this work, we implement new software for improved waterflood management by combining classical finite volume reservoir simulation together with streamline tracing and corresponding interwell flux evaluations to optimize waterflood performance. We have introduced two basic modules here: a commercial reservoir simulator and our own streamline tracing and waterflood management program. Waterflood simulation is performed for a certain time span until simulation is paused, and the streamline tracing program is called to calculate interwell fluxes and adjust new well rates for better waterflood performance. The simulation continues afterwards until the next tracing and adjustment point is reached. The two modules work iteratively. The streamline tracing program is designed to trace streamlines on a compressible velocity field and a general corner point grid system with nonneighboring connections. The new injection rates are adjusted according to each well's injection efficiency calculated from interwell multi-phase fluxes. Streamline tracing is performed successfully not only on simple geometry corner point grid cases, but also on heavily faulted realistic reservoirs under waterflood. After readjusting injection rates multiple times during the simulation, we typically observe a reduction in field water cut of up to 5% and an increase in oil recovery in our test cases. Interwell flux information serves as effective diagnostic tools to identify injector-producer pairs with large amount of water cycling. All simulations conducted here are rigorously finite volume based, which takes into account the full physics of nonadvective processes such as gravity and capillary effects. In conclusion, we have implemented a streamline‐based waterflood management program which works iteratively and cooperatively with a commercial reservoir simulator, without switching to streamline simulation. It provides an effective solution for improving oil recovery in brown fields by combining the rigorous mathematical nature of finite volume simulation and the power of streamline-based flood management.

Synergistic mechanism of well pattern adjustment and heterogeneous phase combined flooding on enhancing oil recovery in mature fault-block reservoirs

“…Another important measure to enhance oil recovery is well pattern adjustment (WPA) (Sayyafzadeh et al 2010;Zhu et al 2018;Guo et al 2019;Wu et al 2020). WPA technology can adjust change streamline distribution and reduce the streamline density in the original main streamline areas, which can improve the sweep efficiency and achieve the purpose of improving development performance (Choudhuri et al 2015;Jia and Deng 2018).…”