Wearable multifunctional printed graphene sensors

Abstract

The outstanding properties of graphene have initiated myriads of research and development; yet, its economic impact is hampered by the difficulties encountered in production and practical application. Recently discovered laser-induced graphene is generated by a simple printing process on flexible and lightweight polyimide films. Exploiting the electrical features and mechanical pliability of LIG on polyimide, we developed wearable resistive bending sensors that pave the way for many cost-effective measurement systems. The versatile sensors we describe can be utilized in a wide range of configurations, including measurement of force, deflection, and curvature. The deflection induced by different forces and speeds is effectively sensed through a resistance measurement, exploiting the piezoresistance of the printed graphene electrodes. The LIG sensors possess an outstanding range for strain measurements reaching >10% A double-sided electrode concept was developed by printing the same electrodes on both sides of the film and employing difference measurements. This provided a large bidirectional bending response combined with temperature compensation. Versatility in geometry and a simple fabrication process enable the detection of a wide range of flow speeds, forces, and deflections. The sensor response can be easily tuned by geometrical parameters of the bending sensors and the LIG electrodes. As a wearable device, LIG bending sensors were used for tracking body movements. For underwater operation, PDMS-coated LIG bending sensors were integrated with ultra-low power aquatic tags and utilized in underwater animal speed monitoring applications, and a recording of the surface current velocity on a coral reef in the Red Sea.npj Flexible Electronics (2019) 3:15 ; https://doi.

Recent developments of advanced micro-supercapacitors: design, fabrication and applications

“…This can further improve the possibility of practical application of wearable electronic devices. Integration with various types of sensors As mentioned above, MSCs can be used to power various types of sensors, and their integration can be applied in many fields 128,129 . For example, MSCs coupled with gas sensor can monitor the change of surrounding gas in real time, which is of great significance to control environmental quality and human health.…”

Flexible Metal‐Free Memory Electronic Made of π‐Conjugation‐Interrupted Hyperbranched Polymer Switch and Reduced Graphene Oxide Electrodes

“…[ 3,4 ] Recently, a series of materials, e.g., carbon nanotubes, graphene, metal nanowires, and conducting polymers, have been widely employed as flexible conductors. [ 5,6 ] Compared to traditional metal or metal oxide electrodes, carbon‐based films as both bottom and top electrodes for metal‐free electronics not only ensure the intrinsical flexibility of device, but also avoid the filamentary conduction which results from the diffusion of metal atoms into intermedium active layers. [ 7–9 ] However, most of the previously reported carbon‐based flexible memory devices are containing a metal electrode as either bottom or top electrode.…”

Laser‐Printed, Flexible Graphene Pressure Sensors

“…Since then, this so‐called laser‐induced graphene (LIG) has been utilized to create numerous electronic devices in a single step. [ 16–20 ] In the present study, we demonstrate the use of LIG to fabricate piezoresistive, mechanically flexible, lightweight, and robust pressure sensors with a large measurement range, thereby offering promise across the whole spectrum of demands for pressure sensors.…”