WEDM Machining Performance of Al Based Metal Matrix Composites Reinforced with Rice Husk Ash

Abstract

With the enhancement in science and technology, necessity of complex shapes in manufacturing industries becomes essential for more versatile applications. These lead to demand for light weight and durable materials for applications in aerospace, defence, automotive, as well as sports and thermal management. Due to its high-tech structural, functional applications like defence, automobile, aerospace, thermal sensitive materials. Al-Matrix composites are considered as one of those classes of advanced engineering materials. In the present study, Al-RHA (Rice Husk Ash) composites are prepared by powder metallurgy route using 10% and 15% RHA by weight as reinforcement. Presence of abrasive particles leads to difficulty of conventional machining on Al-RHA composites hence non-conventional machining WEDM (Wire-Electric Discharge Machining) has been investigated. Suitable machining parameters for composites using wire EDM have been tried to get maximum material removal rate and speed. Optimizations of experimental parameters have been studied using Taguchi and Anova to standardize the process parameters for machining. Prime process parameters like servo-voltage, pulse-on time and pulse-off-time have been taken into consideration to study cutting quality of Al-RHA Metal matrix Composite using cutting speed as response parameters while effect of RHA weight fraction addition is also considered for evaluation to understand its influence on affecting the response.

Investigation on the performance of wire electrical discharge machining (WEDM) using aluminium matrix composites (AMCs) micro-channel

“…In case of MRR 'higher the better' characteristics, S/N ratios are determine using equation (6). The ANOVA is applied using 95% confidence level [36]. The percentage contribution as given in table 7 is determined through using equation (8).…”