In a machine for tensile tests the ultimate strength, stress and strain of the aorta ascendens of 47 female pigs (German landrace) at three different regions of the vessel wall were determined. The animals were fattened under identical conditions in a progeny testing station and slaughtered at the same living weight (102 +/- 2 kg). Weak regressions of body weight and age on parameters measured were nevertheless accounted for. The average elastin content of the aorta ascendens diminished with advancing age but was not significantly correlated to biomechanical properties of the three single samples. Maximum load, stress and modulus of vessel wall segment I (stamped out nearer to the heart) was greater than in sample II. These circumferential segments however exhibited highly stronger biomechanical resistance than sample III, which was stamped longitudinally. In samples I and II there was a negative correlation between thickness of the wall and ultimate tensile stress (N/mm2). Freezing of the material prior to test at -18degrees C for one week resulted in a significant rise in ultimate tensile strength and stress. The meaning of these findings for comparative angiology is discussed.