β-CD-Induced Precipitation of Eriochrome Black T Recovered via CTAB-Assisted Foam Fractionation for Adsorption of Trace Cu(II)

Abstract

In order to remove and reuse the ecotoxic dye Eriochrome black T (EBT) from dyeing wastewater, we used a process called cetyltrimethylammonium bromide (CTAB)-assisted foam fractionation. By optimizing this process with response surface methodology, we achieved an enrichment ratio of 110.3 ± 3.8 and a recovery rate of 99.1 ± 0.3%. Next, we prepared composite particles by adding β-cyclodextrin (β-CD) to the foamate obtained through foam fractionation. These particles had an average diameter of 80.9 μm, an irregular shape, and a specific surface area of 0.15 m2/g. Using these β-CD-CTAB-EBT particles, we were able to effectively remove trace amounts of Cu2+ ions (4 mg/L) from the wastewater. The adsorption of these ions followed pseudo-second-order kinetics and Langmuir isotherm models, and the maximal adsorption capacities at different temperatures were 141.4 mg/g at 298.15 K, 143.1 mg/g at 308.15 K, and 144.5 mg/g at 318.15 K. Thermodynamic analysis showed that the mechanism of Cu2+ removal via β-CD-CTAB-EBT was spontaneous and endothermic physisorption. Under the optimized conditions, we achieved a removal ratio of 95.3 ± 3.0% for Cu2+ ions, and the adsorption capacity remained at 78.3% after four reuse cycles. Overall, these results demonstrate the potential of β-CD-CTAB-EBT particles for the recovery and reuse of EBT in dyeing wastewater.

Enhanced Reactive Brilliant Blue Removal Using Chitosan–Biochar Hydrogel Beads

“…The Langmuir model and Freundlich model were used to fit the isotherm dates [ 52 ]. The pseudo-first-order kinetic model, pseudo-second-order kinetic model, and intraparticle diffusion model were chosen to fit the kinetic dates [ 21 ], and the Van’t Hoff equation was used to calculate the thermodynamic parameters [ 53 ].…”