Search citation statements
Paper Sections
Citation Types
Year Published
Publication Types
Relationship
Authors
Journals
Cited by 2 publications
References 0 publications
利用原子吸收谱线实现气室温控
Objective Miniature optical atomic magnetometers are small, lowpower, and highly sensitive. They have broad application prospects in geological exploration, geomagnetic navigation, and underwater target detection. To realize a miniature optical atomic magnetometer, it is necessary to accurately measure the temperature of the cell and achieve highprecision temperature control of the cell. In various existing temperature measurement methods, such as infrared, grating, and optical refractive index temperature measurements, the temperature measurement structure is complex and difficult to miniaturize. Therefore, in this study, a spectral absorption method is proposed to measure the internal temperature of the cell. After stabilizing the power and frequency of the incident light, the cell temperature is controlled by projecting the light from the cell. This method provides an alternative scheme for the temperature control of the cell of a miniature optical atomic magnetometer.Methods In this study, the atomic absorption spectrum was used to measure the temperature of the cells. First, the feasibility of using the absorption spectrum to control temperature was theoretically analyzed. The theoretical analysis shows that when the incident laser intensity is locked and the laser frequency is locked at the center frequency of the spectral line, the light intensity transmitting the cell is only related to the temperature. Subsequently, an experimental platform was developed (Fig. 1). In the experimental setup, a laser was produced using a verticalcavity surfaceemitting laser (VCSEL). First, the laser output power was detected by a photodetector, and a laser power servo was applied to control the VCSELinjection current, thus locking the optical power. Subsequently, the atomic absorption spectrum line was detected and converted to a laser frequencydiscriminating signal by synchronous modulation and demodulation technology. A laser frequency servo was applied to control the laser temperature, consequently locking the laser frequency at the center of the absorption spectrum line. Finally, the signal amplitude at the center of the atomic absorption spectrum was used to measure the cell temperature and realize cell temperature control. We achieved celltemperature control using this scheme. The temperature control scheme proposed in this paper and the temperature control realized using the thermistor 1 measurement were used, and thermistor 2 was used to evaluate the control effect. Results and DiscussionsIt was observed that when the laser intensity and frequency were locked, the laser noise power spectral density decreased in the lowfrequency area (Fig. 2), and after locking, the light intensity before and after the cell decreased with the increase in cell temperature (Fig. 3). For our experimental parameters, the optimal working temperature of the cell for our scheme is 65-70 ℃. A fitting curve was created using the theory, and the error of the cell temperature calculated by the fitting curve was not more than ±0. 3 ℃ within the...
利用原子吸收谱线实现气室温控
Objective Miniature optical atomic magnetometers are small, lowpower, and highly sensitive. They have broad application prospects in geological exploration, geomagnetic navigation, and underwater target detection. To realize a miniature optical atomic magnetometer, it is necessary to accurately measure the temperature of the cell and achieve highprecision temperature control of the cell. In various existing temperature measurement methods, such as infrared, grating, and optical refractive index temperature measurements, the temperature measurement structure is complex and difficult to miniaturize. Therefore, in this study, a spectral absorption method is proposed to measure the internal temperature of the cell. After stabilizing the power and frequency of the incident light, the cell temperature is controlled by projecting the light from the cell. This method provides an alternative scheme for the temperature control of the cell of a miniature optical atomic magnetometer.Methods In this study, the atomic absorption spectrum was used to measure the temperature of the cells. First, the feasibility of using the absorption spectrum to control temperature was theoretically analyzed. The theoretical analysis shows that when the incident laser intensity is locked and the laser frequency is locked at the center frequency of the spectral line, the light intensity transmitting the cell is only related to the temperature. Subsequently, an experimental platform was developed (Fig. 1). In the experimental setup, a laser was produced using a verticalcavity surfaceemitting laser (VCSEL). First, the laser output power was detected by a photodetector, and a laser power servo was applied to control the VCSELinjection current, thus locking the optical power. Subsequently, the atomic absorption spectrum line was detected and converted to a laser frequencydiscriminating signal by synchronous modulation and demodulation technology. A laser frequency servo was applied to control the laser temperature, consequently locking the laser frequency at the center of the absorption spectrum line. Finally, the signal amplitude at the center of the atomic absorption spectrum was used to measure the cell temperature and realize cell temperature control. We achieved celltemperature control using this scheme. The temperature control scheme proposed in this paper and the temperature control realized using the thermistor 1 measurement were used, and thermistor 2 was used to evaluate the control effect. Results and DiscussionsIt was observed that when the laser intensity and frequency were locked, the laser noise power spectral density decreased in the lowfrequency area (Fig. 2), and after locking, the light intensity before and after the cell decreased with the increase in cell temperature (Fig. 3). For our experimental parameters, the optimal working temperature of the cell for our scheme is 65-70 ℃. A fitting curve was created using the theory, and the error of the cell temperature calculated by the fitting curve was not more than ±0. 3 ℃ within the...
光纤传感技术在储能电池监测中的研究进展
No abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
Contact Info
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Product
Resources
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2025 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.
