Submarine landslides can generate sediment-laden flows whose scale is impressive. Individual flow deposits have been mapped that extend for 1,500 km offshore from northwest Africa. These are the longest run-out sediment density flow deposits yet documented on Earth. This contribution analyses one of these deposits, which contains ten times the mass of sediment transported annually by all of the world's rivers. Understanding how this type of submarine flow evolves is a significant problem, because they are extremely difficult to monitor directly. Previous work has shown how progressive disintegration of landslide blocks can generate debris flow, the deposit of which extends downslope from the original landslide. We provide evidence that submarine flows can produce giant debris flow deposits that start several hundred kilometres from the original landslide, encased within deposits of a more dilute flow type called turbidity current. Very little sediment was deposited across the intervening large expanse of sea floor, where the flow was locally very erosive. Sediment deposition was finally triggered by a remarkably small but abrupt decrease in sea-floor gradient from 0.05 degrees to 0.01 degrees. This debris flow was probably generated by flow transformation from the decelerating turbidity current. The alternative is that non-channelized debris flow left almost no trace of its passage across one hundred kilometres of flat (0.2 degrees to 0.05 degrees) sea floor. Our work shows that initially well-mixed and highly erosive submarine flows can produce extensive debris flow deposits beyond subtle slope breaks located far out in the deep ocean.

No abstract

A study of the seafloor of the Gulf of Cadiz west of the Strait of Gibraltar, using an integrated geophysical and sedimentological data set, gives new insights into sediment deposition from downslope thermohaline bottom currents. In this area, the Mediterranean Outflow (MO) begins to mix with North Atlantic waters and separates into alongslope geostrophic and downslope ageostrophic components. Changes in bedform morphology across the study area indicate a decrease in the peak velocity of the MO from >1 m s )1 to <0AE5 m s )1 . The associated sediment waves form a continuum from sand waves to muddy sand waves to mud waves. A series of downslope-oriented channels, formed by the MO, are found where the MO starts to descend the continental slope at a water depth of 700 m. These channels are up to 40 km long, have gradients of <0AE5°, a fairly constant width of 2 km and a depth of 75 m. Sand waves move down the channels that have mud wave-covered levees similar to those seen in turbidite channel-levee systems, although the channel size and levee thickness do not decrease downslope as in typical turbidite channel systems. The channels terminate abruptly where the MO lifts off the seafloor. Gravity flow channels with lobes on the basin floor exist downslope from several of the bottom current channels. Each gravity flow system has a narrow, slightly sinuous channel, up to 20 m deep, feeding a depositional lobe up to 7 km long. Cores from the lobes recovered up to 8AE5 m of massive, wellsorted, fine sand, with occasional mud clasts. This work provides an insight into the complex facies patterns associated with strong bottom currents and highlights key differences between bottom current and gravity flow channellevee systems. The distribution of sand within these systems is of particular interest, with applications in understanding the architecture of hydrocarbon reservoirs formed in continental slope settings.

No abstract

International audienceThe Cap de Creus canyon, northwestern Mediterranean Sea, belongs to a complex network of submarine canyons cutting the western Gulf of Lion continental shelf and opening into the larger Sète canyon. Swath bathymetry data, MAK-1M deep-towed side-scan sonar imagery and 5 kHz high resolution seismic reflection profiles show striking morphologies in the Cap de Creus canyon floor and walls. As a consequence of the canyon head and the upper reach severe incision, the continental shelf dramatically narrows in front of the Creus Cape promontory. The upper canyon has a flat-bottomed thalweg incised in a mega-scale sediment furrow field displaying hyperbolic seismic facies. The tens of kilometres long linear furrows extend also over the middle canyon down to 1400 m of water depth. The furrows on either side of the canyon are not parallel but oblique and display varying degrees of excavation. Mid-channel sediment bars are locally present in the thalweg, which is made of sandy lag deposits, as revealed by its acoustic response and verified by sediment samples. The middle canyon is linear and steep, with an up to 700 m high southern wall, contrasting with the sinuous, smooth lower canyon, which is controlled by flowage of the underlying Messinian evaporites. Large sections of the canyon are affected by sediment instability processes. The lower Cap de Creus canyon hangs up to 260 m over its distalmost reach and the Sète canyon through a narrow, less than 1 km wide, gorge. Numerous scours up to 10 m deep suggesting bed load transport occupy the lower Sète canyon immediately downstream of the Cap de Creus canyon mouth. The data set provides the first complete very-high resolution imaging of a submarine canyon from its upper part down to its distalmost reach. The observations evidence a wide set of erosion, transport and deposition processes along the Cap de Creus canyon, including sediment entrapment at the canyon head, furrow-generating dense water cascading through the southern wall, along-channel currents strong enough to excavate specific sections of the channel floor and bed load sediment transport as demonstrated by the presence of mega-ripples, crescent scours and grooves in the lower canyon