We demonstrate a passively mode-locked diode-pumped thin-disk Yb:YAG laser generating 810-fs pulses at 1030 nm with as much as 60 W of average output power (without using an amplifier). At a pulse repetition rate of 34.3 MHz, the pulse energy is 1.75 microJ and the peak power is as high as 1.9 MW. The beam quality is close to the diffraction limit, with M2 < 1.1.

We have developed optically pumped passively mode-locked vertical-external-cavity surface-emitting lasers. We achieved as much as 950 mW of mode-locked average power in chirped 15-ps pulses, or 530 mW in 3.9-ps pulses with moderate chirp. Both lasers operate at a repetition rate of 6 GHz and have a diffraction-limited output beam near 950 nm. In continuous-wave operation, we demonstrate an average output power as high as 2.2 W. Device designs with a low thermal impedance and a smooth gain spectrum are the key to such performance. We discuss design and fabrication of the gain structures and, particularly, their thermal properties. Index Terms-Mode locking, pulse generation, semiconductor lasers, thermal effects in lasers.

We demonstrate an optically pumped passively mode-locked external-cavity semiconductor laser generating 4.7-ps pulses at 957 nm with as much as 2.1 W of average output power and a 4-GHz repetition rate. Compared with earlier results, the chirp of the pulses has been greatly reduced by use of an intracavity etalon. Apart from restricting the bandwidth, the etalon also helps optimize wavelength-dependent gain parameters and dispersion.

One of the most application-relevant milestones that remain to be achieved in the field of passively mode-locked surface-emitting semiconductor lasers is the integration of the semiconductor absorber into the gain structure, enabling the realization of ultra-compact high-repetition-rate laser devices suitable for wafer-scale integration. We have recently succeeded in fabricating the key element in this concept, a quantumdot-based saturable absorber with a very low saturation fluence, which for the first time allows stable mode locking of surface-emitting semiconductor lasers with the same mode areas on gain and absorber. Experimental results at high repetition rates of up to 30 GHz are shown.PACS 42.55.Px; 42.60.Fc; 42.82.Gw

No abstract