No abstract

In this work the microstructure and degradation behavior of several as-cast alloy compositions belonging to the Mg rich corner of the Mg-Si-Sr system are presented and related. The intermetallic phases are identified and analyzed describing the microstructure evolution during solidification. It is intended in this work to obtain insight in the behavior of the ternary alloys in in vitro tests and to analyze the degradation behavior of the alloys under physiologically relevant conditions. The as-cast specimens have been exposed to immersion tests, both mass loss (ML) and potentiodynamic polarization (PDP). The degradation rate (DR) have been assessed and correlated to microstructure features, impurity levels and alloy composition. The initial reactions resulted to be more severe while the degradation stabilizes with time. A higher DR is related with a high content of the MgSr phase and with the presence of coarse particles of the intermetallics MgSi, MgSiSr and MgSiSr. Specimens with a higher DR typically have higher levels of impurities and alloy contents.

No abstract

Abstract:Profiting

Three different phase fields are predicted and experimentally detected in the Mg rich corner of the Mg-Ca-Si ternary diagram. The present phases are Mg + MgCaSi + Mg2Si in phase field 1, Mg + MgCaSi in phase field 2 and Mg + Mg2Ca + MgCaSi in phase field 3. The focus of this study is on the formation and evolution of the intermetallic phases. The final microstructures have been related with their solidification process and with the alloys mechanical properties. A clear influence of the observed intermetallic phases on the mechanical performance was found. A bigger size and higher amounts of the MgCaSi intermetallic phase increase the alloys strength and make them brittle, while in its fine morphology MgCaSi reduces the strengthening effect and slightly decreases the ductility compared to pure Mg. Mg2Si phase in its needle-like small size morphology contributes to an increase of the hardness and compressive strength. Its presence reduces the alloys ductility making them brittle. Finally, the highest values for compressive strength and hardness are related to the Mg2Ca presence.