During a test programme on a modern heavy-duty engine, measurements were made at engine-out and tailpipe of particle number and particulate mass using the draft heavy-duty inter-laboratory correlation exercise guide prepared by the UN-ECE Particle Measurement Programme (PMP) 1. In addition to the PMP measurements, the elemental carbon content of the particulate matter from this programme was analysed using thermogravimetric analysis of separate filters. The particle number measurement system proved to provide a reliable and repeatable measurement procedure. Test results over a variety of operational cycles showed a reduction in particle numbers of some 3 orders of magnitude. Particle number emissions were of similar magnitude regardless of the test cycle. Background-corrected particulate mass emissions results using the partial flow dilution method showed emissions levels below 5mg/kWh over all the transient cycles tested.

No abstract

No abstract

No abstract

This paper reviews the options available to the engine manufacturer to comply with US off-highway Tier 3 emissions limits and beyond. The most cost-effective solutions are considered and discussed. Possible technical scenarios for the longer-term development of off-highway engines are reviewed.   NOTE: This paper was presented at the ASME 2003 Internal Combustion Engine Division Spring Technical Conference but was printed in the ASME 2003 Internal Combustion Engine and Rail Transportation Divisions Fall Technical Conference proceedings, pages 419–426. It should appear under the Application and Operation heading.