Rescue blankets are medical devices made of a polyethylene terephthalate sheet coated with a thin aluminum layer. Blankets are used for protection against hypothermia in prehospital emergency medicine and outdoor sports, but totally different qualities are typical for these multi-functional tools. On the one hand, rescue sheets prevent hypothermia by reducing thermo-convection and diminishing heat loss from evaporation and thermal radiation. On the other hand, the sheets promote cooling by acting as a radiant barrier, by providing shade and even by increasing heat conduction when the sheet is in direct contact with the skin. As foils are watertight and windproof, they can function as vapor barriers and even as stopgap bivouac sacks. We evaluated three experimental studies, one on heat loss by rescue blankets according to surface color, one on transparency with ultraviolet radiation, high-energy visible light and visible light, and one on infrared radiation from rescue blankets. When evaluating the effects of different bands of the electromagnetic spectrum on rescue sheets, we focused on ultraviolet radiation (200–380 nm), high-energy visible light in the violet/blue band (380–450 nm), visible light (380–760 nm) and infrared radiation (7500–13,500 nm). Rescue sheets transmit between 1% and 8% of visible light and about 1% of ultraviolet B radiation (280–315 nm), providing sufficient transparency and adequate protection from snow blindness. Reflection of visible light increases detectability in search and rescue missions performed in good visibility conditions, while reflection of infrared radiation increases detectability in poor visibility conditions and provides protection against hypothermia.

Gripping and push forces, also named coupling forces, have induced effects on the transmission of the vibration in the upper limb. The assessment of the vibration exposure with powered tools thus requires that these man/machine coupling parameters are controlled and monitored. To date, no reliable metrological systems enable their precise measurements. This study first investigated how much precision could be expected from the pressure mapping technique for the determination of coupling forces by means of numerical integration. Then a specific procedure was worked out and validated to instrument hand-held tools and measure the coupling forces with regard to the appropriate current standards. The proposed method was applied as a case study on an ordinary breaker and an anti-vibration breaker.