This open access article is distributed under a Creative Commons Attribution (CC-BY) 4.0 license.

The paper presents experimental studies of the tribological characteristics of liquid lubricants of various viscosity classes and various groups of operation when using fullerene additives. Tribological characteristics were evaluated on a four-ball friction machine according to GOST 9490. Assessment was subject to: wear rate and critical load, which characterize the anti-wear properties of the lubricant, as well as welding load and bully index, which characterize an anti-bully properties of the material. It is shown that the improvement of the wear index for all oils begins with the concentration 0,2 % masses, fullerenes in the lubricant and does not exceed the values 11,1 … 15 %. At a fullerene concentration less than 0,2 % masses, no positive effect is observed. Positive effect 11,8 … 17,4 % characteristic of the indicator – critical load that characterizes the range of performance of anti-wear additives. At the same time, an increase in the critical load begins with concentration 0,1 % masses, fullerenes in a lubricant and manifests itself most effectively at a concentration 0,2 % masses. Changes in the magnitude of the welding load during the experiments were not recorded, this allows us to conclude, that the addition of a finely dispersed fullerene powder in a liquid lubricant does not improve anti-bully properties, but is only an anti-wear additive. It is shown that the way to improve the tribological properties of lubricants by introducing a finely dispersed powder of fullerenes in base technical oils is ineffective. It is necessary to develop other, more technological methods and methods for introducing fullerene additives into technical lubricants.