No abstract

No abstract

No abstract

International audienceFluids, and especially cryogenic fluids like Hydrogen H2 and Oxygen O2 , are widely used in space technology for propulsion and cooling. The knowledge of fluid behaviour during the acceleration variation and under reduced gravity is necessary for an efficient management of fluids in space. Such a management also asks fundamental questions about thermo-hydrodynamics and phase change once buoyancy forces are cancelled. For security reasons, it is nearly impossible to use the classical microgravity means to experiment with such cryofluids. However, it is possible to counterbalance gravity by using the paramagnetic (O2) or diamagnetic (H2) properties of fluids. By applying a magnetic field gradient on these materials, a volume force is created that is able to impose to the fluid a varying effective gravity, including microgravity. We have set up a magnetic levitation facility for H2 in which many experiments have been performed. A new facility for O2 is under construction that will enable fast change in the effective gravity by quenching down the magnetic field. The facilities and some particularly representative experimental results are presented

Several studies for the LHC luminosity upgrade pointed out the need for low-beta quadrupoles with apertures larger than the present baseline (70 mm). In this paper we focus on the design issues of a 130 mm aperture quadrupole.We first consider the Nb-Ti option, presenting a magnetic design with the LHC dipole and quadrupole cables. We study the electromagnetic forces and we discuss the field quality constraints. For the Nb 3 Sn option, we sketch three designs, two based on the LARP 10 mm width cable, and one on a larger cable with the same strand. The issue of the stress induced by the e.m. forces, which is critical for the Nb3Sn, is discussed using both scaling laws and finite element models. AbstractSeveral studies for the LHC luminosity upgrade pointed out the need for low-beta quadrupoles with apertures larger than the present baseline (70 mm). In this paper we focus on the design issues of a 130 mm aperture quadrupole. We first consider the Nb-Ti option, presenting a magnetic design with the LHC dipole and quadrupole cables. We study the electromagnetic forces and we discuss the field quality constraints. For the Nb 3 Sn option, we sketch three designs, two based on the LARP 10 mm width cable, and one on a larger cable with the same strand. The issue of the stress induced by the e.m. forces, which is critical for the Nb 3 Sn, is discussed using both scaling laws and finite element models.