With the increasing concerns on the impact of cement production on the environment and the need to protect the environment, the use of mineral additives as cementitious material to partially substitute cement is being considered as an effective option. One of such material is fired clay brick which can be sourced as generated waste from clay brick industry. This has an added advantage of reducing industrial waste and preserving the natural resources. The experimental objective of this study is to examine the possibility of utilizing clay brick waste as partial replacement for Portland cement in concrete. The clay brick was finely ground into powder size, and after grinding, the morphological characterization of the powder materials was carried out using scanning electron microscopy (SEM). Moreover, the chemical composition of the brick material was determined using X-ray fluorescence (XRF). Laboratory tests were carried out to determine the workability, split tensile and compressive strength properties of the concrete with 0%, 10%, 20%, 30% and 40% partial replacement of cement with ground clay brick (CB). From the test results, the chemical composition of the brick powder meets the standard requirements for pozzolanic material, with the SEM revealing an amorphous solid mass. The workability of the concrete reduces with increase in brick powder content. A significant improvement of the split tensile and compressive strength of the concrete was achieved at 10% cement replacement, after which a decrease in strength with increasing ground clay brick content was recorded. The use of ground clay brick of not more than 15% was recommended for concrete production.

No abstract

No abstract

Managing municipal solid wastes (MSW) is progressively becoming a major challenge in many cities of developing nations because of rapid urbanization and rise in population. This can be described by ineffective collection methods, inadequate coverage of the collection, processing system and inappropriate disposal. This paper presents the current state of solid waste management in a semi-urban city, its associated challenges and prospects that are within. A field work that involves the characterization and types of the waste generated, and frequency of collection was carried out within the study area. Four locations where the major waste bins are located within the city were considered. A representative sample of 280 kg was used for the waste characterization, and the results show that about 64% of the wastes are recyclable with lots of organic waste that can be used as compost. The only dump site in the city was visited in order to obtain useful information concerning the present state of solid waste management. The study revealed that there is presently no investment made to the existing development plan to introduce a modern waste management system. The study suggests new approach that could be used by institutions and government agencies for MSW management to realize a sustainable and efficient sanitation, and possible resources generation potentials that could be harnessed from the waste stream.

No abstract