The dependence of the dielectric constant, at frequencies between 1 MHz and 1 GHz, on the volumetric water content is determined empirically in the laboratory. The effect of varying the texture, bulk density, temperature, and soluble salt content on this relationship was also determined. Time‐domain reflectometry (TDR) was used to measure the dielectric constant of a wide range of granular specimens placed in a coaxial transmission line. The water or salt solution was cycled continuously to or from the specimen, with minimal disturbance, through porous disks placed along the sides of the coaxial tube. Four mineral soils with a range of texture from sandy loam to clay were tested. An empirical relationship between the apparent dielectric constant Ka and the volumetric water content θv, which is independent of soil type, soil density, soil temperature, and soluble salt content, can be used to determine θv, from air dry to water saturated, with an error of estimate of 0.013. Precision of θv to within ±0.01 from Ka can be obtained with a calibration for the particular granular material of interest. An organic soil, vermiculite, and two sizes of glass beads were also tested successfully. The empirical relationship determined here agrees very well with other experimenters' results, which use a wide range of electrical techniques over the frequency range of 20 MHz and 1 GHz and widely varying soil types. The results of applying the TDR technique on parallel transmission lines in the field to measure θv versus depth are encouraging.

DAVIS, J.L. and ANNAN, A.P. 1989. Ground-penetrating radar for high-resolution mapping of soil and rock stratigraphy. Geophysical Prospecting 37, 531-551.Ground-penetrating radar is a technique which offers a new way of viewing shallow soil and rock conditions. The need to better understanding overburden conditions for activities such as geochemical sampling, geotechnical investigations, and placer exploration, as well as the factors controlling groundwater flow, has generated an increasing demand for techniques which can image the subsurface with higher resolution than previously possible.The areas of application for ground-penetrating radar are diverse. The method has been used successfully to map ice thickness, water depth in lakes, bedrock depth, soil stratigraphy, and water table depth. It is also used to delineate rock fabric, detect voids and identify karst features. The effective application of the radar for the high-resolution definition of soil stratigraphy and fractures in bedrock is highlighted.The basic principles and practices involved in acquiring high quality radar data in the field are illustrated by selected case histories. One example demonstrates how radar has been used to map the bedrock and delineate soil horizons to a depth of more than 20 m. Two case histories show how radar has been used to map fractures and changes of rock type to 40 m range from inside a mine. Another case history demonstrates how radar has also been used to detect and map the extent of groundwater contamination. The corroboration of the radar results by borehole investigations demonstrates the power and utility of the high-resolution radar method as an aid for interpolation and extrapolation of the information obtained with conventional coring programmes. With the advent of new instrumentation and field procedures, the routine application of the radar method is becoming economically viable and the method will see expanded use in the future.

termines the diurnal evolution of the atmospheric boundary layer (Callies et al., 1998) . Currently, there is a needWe present a comprehensive review of methods to measure soil to establish and quantify the contribution of soil water water content with ground penetrating radar (GPR). We distinguish content-regulated land-atmosphere coupling to regional

We present a comprehensive review of methods to measure soil water content with ground penetrating radar (GPR). We distinguish four methodologies: soil water content determined from reflected wave velocity, soil water content determined from ground wave velocity, soil water content determined from transmitted wave velocity between boreholes, and soil water content determined from the surface reflection coefficient. For each of these four methodologies, we discuss the basic principles, illustrate the quality of the data with field examples, discuss the possibilities and limitations, and identify areas where future research is required. We hope that this review will further stimulate the community to consider ground penetrating radar as one of the possible tools to measure soil water content.

No abstract