The objective of this work was to develop heat treatment parameters of an austempered cast iron alloy ASTM 897 / A 897M - 1400/1100/1, aiming at the production of a truck spring support. The austempered nodular cast iron, known by the acronym ADI - Austempered Ductile Iron - is a class of nodular cast iron that, after austempered thermal treatment, increases significantly its mechanical properties and tenacity (Machado, 2007). Mechanical and metallographic tests demonstrated the great influence that the level of microshrinkage has on the elongation and mechanical resistance of the material. Generally, tensile tests demonstrate high elongation due to minimal presence of microshrinkage and segregations in the metallic matrix of the material, as well as to the presence of austenite with high carbon retained in the ADI matrix. Analyzes were performed to determine if the mechanical properties required by ASTM 897 / A897M were achieved. Within this standard, four degrees can be obtained. The degree of interest in this study was 1400/1100/1, which is the grade requested by the company, so that the truck spring support can be put into service. Tensile, Charpy and optical microscopy tests were carried out.