No abstract

Relatively limited attention has been given to the presence of fungi in the aquatic environment compared to their occurrence in other matrices. Taking advantage and recognizing the biodegradable capabilities of fungi is important, since these organisms may produce many potent enzymes capable of degrading toxic pollutants. Therefore, the aim of this study was to evaluate the potential ability of some species of filamentous fungi that occur in the aquatic environment to degrade pesticides in untreated surface water. Several laboratory-scale experiments were performed using the natural microbial population present in the aquatic environment as well as spiked fungi isolates that were found to occur in different water matrices, to test the ability of fungi to degrade several pesticides of current concern (atrazine, diuron, isoproturon and chlorfenvinphos). The results obtained in this study showed that, when spiked in sterile natural water, fungi were able to degrade chlorfenvinphos to levels below detection and unable to degrade atrazine, diuron and isoproturon. Penicillium citrinum, Aspergillus fumigatus, Aspergillus terreus and Trichoderma harzianum were found to be able to resist and degrade chlorfenvinphos. These fungi are therefore expected to play an important role in the degradation of this and other pollutants present in the aquatic environment.

No abstract

No abstract

a b s t r a c tA multi-barrier system was studied for the production of drinking water with high chemical and microbiological quality. The integration of nanofiltration (NF) and ultraviolet (UV) photolysis was tested at pilot scale in a surface water treatment plant.The NF membranes tested, Desal DK and NF270, allow for the production of permeates with high quality standards, although the membrane with higher molecular weight cut-off (NF270) revealed to be the best option for surface water treatment due to its higher permeability. The NF270 membrane was also efficient to deliver high quality water, even under high pollutant concentrations, making possible to operate with water recovery rates as high as 98%.Extensive studies were performed in the water treatment plant where the proposed system was tested at three locations of the drinking water production line. Seeking to achieve the best compromise between high recovery rate, high retention of chemicals and microorganisms as well as preventing operational problems (flux decline and fouling), it was found that the integrated system should be placed after the conventional sand filtration, operating at a 91% recovery rate. Under the selected conditions -TMP of 8 bar and recovery rate of 91% -it is possible to operate at constant permeability without flux decline for a period of 15 days, after which a gentle CIP procedure is recommended.Membrane fouling was also investigated and the major foulant classes identified were proteins, polysaccharides and humic acids. A cleaning protocol was also tested and the impact of each cleaning step on the recovery of permeability evaluated.