Advancement in the growth of 4H-SiC with low micropipe densities (∼ 0.11 cm-2) in achieving high pure epitaxial layers, enabled the development of high-resolution 4H-SiC alpha particle Schottky radiation detectors for harsh environments. In particular, the study considers two types of 4H-SiC radiation detectors having Ni and Ti as Schottky contacts. They are fabricated by depositing Ni and Ti on 25 μm thick n-type 4H-SiC by epitaxially growing on 350 μm thick conducting SiC substrates. Electrical characterization and alpha spectral measurements performed on Ni/4H-SiC and Ti/4H-SiC SBDs are reported in this work. The spectral measurements were carried out using 241Am alpha emitting radioactive source. Ni/ 4H-SiC Schottky detector showed a better spectral response with 22.87 keV FWHM (∼ 0.416%) at a reverse bias of 150 V for 5.48 MeV alpha particles while Ti/4H-SiC Schottky detector achieved a resolution of 38.25 keV FWHM (∼ 0.697%) at 170 V reverse bias. This work presented spectral broadening analysis to understand the various factors affecting the energy resolution of the detectors. The extracted charge collection efficiencies (CCEs) are approximately 99% in both the detectors. In addition, polarization effects are not noticed in any of the fabricated detectors. The diffusion length of minority carriers (Lp ) is computed based on the drift-diffusion model by fitting the CCE curve as a function of applied bias, and the values are close to 9 μm and 7 μm for Ni/4H-SiC SBD and Ti/4H-SiC SBD detectors, respectively. Annealing at 400°C for 5 minutes in N2 ambient resulted in resolution of 23.98 keV FWHM (∼ 0.436%) for Ni/4H-SiC SBD detector at -170 V and 36.21 keV FWHM (∼ 0.661%) for Ti/4H-SiC SBD detector at -150 V. Overall Ni/4H-SiC SBD detectors showed superior spectral characteristics and superior resolution when compared to Ti/4H-SiC SBD detectors. However, the Ti/4H-SiC SBD detector fabricated in this work performed better than the previously reported work on a similar device structure. Hence, future work aimed at improving resolution of radiation detectors could also consider Ti/4H-SiC SBDs along with Ni/4H-SiC SBDs.