In this research, kaolin, ball clay, sawdust and rice husk were used to produce insulation bricks through the solid state synthesis method. Two temperatures, 1100oC and 1200oC were used to sinter the green samples. X-ray fluorescence, scanning electron microscopy, compressive strength tests etc. were used to analyse the properties of the produced bricks. Chemical composition analysis on the starting raw materials showed that SiO2 and Al2O3 were the major constituents while Fe2O3, Na2O, K2O and TiO2 were the minor constituents. As the amounts of kaolin used in preparing the samples decrease, the bulk density, modulus of rupture and cold crushing strength of the bricks decreases while the water absorption capacity, linear shrinkage increases. The thermal analysis showed that on heating the samples, the reactions were mainly exothermic with between 8 to 10 mW/mg of heat released. The morphology of the samples showed that the pores began to collapse when the amount of kaolin present is below 70 wt. %. Sintering the samples at 1100oC and 1200oC led to slightly different values in the results and is therefore very significant. Keywords: Insulation bricks, Kaolin, sawdust, rice husk, temperature effects