Diamond-like carbon (DLC) films have been the focus of extensive research in recent years due to their potential applications as surface coatings on biomedical devices. Titanium dioxide (TiO2) in the anatase crystalline form is a strong bactericidal agent when exposed to near-UV light. In this work we investigate the bactericidal activity of DLC films containing TiO2 nanoparticles. The films were grown on 316L stainless-steel substrates from a dispersion of TiO2 in hexane using plasma-enhanced chemical vapor deposition. The composition, bonding structure, surface energy, stress, and surface roughness of these films were also evaluated. The antibacterial tests were performed against Escherichia coli (E. coli) and the results were compared to the bacterial adhesion force to the studied surfaces. The presence of TiO2 in DLC bulk was confirmed by Raman spectroscopy. As TiO2 content increased, I(D)/I(G) ratio, hydrogen content, and roughness also increased; the films became more hydrophilic, with higher surface free energy and the interfacial energy of bacteria adhesion decreased. Experimental results show that TiO2 increased DLC bactericidal activity. Pure DLC films were thermodynamically unfavorable to bacterial adhesion. However, the chemical interaction between the E. coli and the studied films increased for the films with higher TiO2 concentration. As TiO2 bactericidal activity starts its action by oxidative damage to the bacteria wall, a decrease in the interfacial energy of bacteria adhesion causes an increase in the chemical interaction between E. coli and the films, which is an additional factor for the increasing bactericidal activity. From these results, DLC with TiO2 nanoparticles can be useful for producing coatings with antibacterial properties.

No abstract

Boron doped diamond thin films were grown on titanium alloy substrates (Ti6Al4V) with 36 × 35 × 1.3 mm at 873-933 K at 6.5 × 10³ Pa during 8 h by hot filament CVD assisted technique. The boron source was obtained from a H2 line forced to pass through a bubbler containing B2O3 dissolved in methanol (BC = 6000 ppm). The films were grown on both sides of perforated and non-perforated substrates. Emphasis for diamond growing on perforated substrates have been done in order to increase the active surface area and hereafter to promote an easier electrolyte flow for wastewater treatment. The electrode performance was determined by cyclic voltammetry measurements in KCl, KNO3, Na2SO4, HCl, HNO3 and H2SO4 solutions and the reversibility behavior of the Fe(CN)6(3-/4-) at the Ti6Al4V/Diamond electrode were studied. Also, Scaning Electron Microcopy and Raman Scattering Spectroscopy were used for morphology and diamond quality evaluation, respectively

No abstract