Strong light localization inside the nanoscale gaps provides remarkable opportunities for creation of various medical and biosensing platforms stimulating an active search for inexpensive and easily scalable fabrication at a sub-100 nm resolution. In this paper, self-organized laser-induced periodic surface structures (LIPSSs) with the shortest ever reported periodicity of 70 ± 10 nm were directly imprinted on the crystalline Si wafer upon its direct femtosecond-laser ablation in isopropanol. Appearance of such a nanoscale morphology was explained by the formation of a periodic topography on the surface of photoexcited Si driven by interference phenomena as well as subsequent down-scaling of the imprinted grating period via Rayleigh−Taylor hydrodynamic instability. The produced deep subwavelength LIPSSs demonstrate strong anisotropic anti-reflection performance, ensuring efficient delivery of the incident far-field radiation to the electromagnetic "hot spots" localized in the Si nanogaps. This allows realization of various optical biosensing platforms operating via strong interactions of quantum emitters with nanoscale light fields. The demonstrated 80-fold enhancement of spontaneous emission from the attached nanolayer of organic dye molecules and in situ optical tracing of catalytic molecular transformations substantiate bare and metal-capped deep subwavelength Si LIPSSs as a promising inexpensive multifunctional biosensing platform.

By using solid phase epitaxy of thin Fe films and molecular beam epitaxy of Si, a p+-Si/p-Si/β-FeSi2 nanocrystallites/n-Si(111) diode structure was fabricated. Transmission electron microscopy data confirmed a well-defined multilayered structure with embedded nanocrystallites of two typical sizes: 3–4 and 15–20 nm, and almost coherent epitaxy of the nanocrystallites with the Si matrix. The diode at zero bias conditions exhibited a current responsivity of 1.7 mA/W, an external quantum efficiency of about 0.2%, and a specific detectivity of 1.2 × 109 cm × Hz1/2/W at a wavelength of 1300 nm at room temperature. In the avalanche mode, the responsivity reached up to 20 mA/W (2% in terms of efficiency) with a value of avalanche gain equal to 5. The data obtained indicate that embedding of β-FeSi2 nanocrystallites into the depletion region of the Si p-n junction results in expansion of the spectral sensitivity up to 1600 nm and an increase of the photoresponse by more than two orders of magnitude in comparison with a conventional Si p-n junction. Thereby, fabricated structure combines advantage of the silicon photodiode functionality and simplicity with near infrared light detection capability of β-FeSi2.

No abstract

Recent progress in hybrid optical nanomaterials composed of dissimilar constituents permitted an improvement in the performance and functionality of novel devices developed for optoelectronics, catalysis, medical diagnostics, and sensing. However, the rational combination of contrasting materials such as noble metals and semiconductors within individual hybrid nanostructures via a ready-to-use and lithography-free fabrication approach is still a challenge. Here, we report on a two-step synthesis of hybrid Au-Si microspheres generated by laser ablation of silicon in isopropanol followed by laser irradiation of the produced Si nanoparticles in the presence of HAuCl 4 . Thermal reduction of [AuCl 4 ] − species to a metallic gold phase, along with its subsequent mixing with silicon under laser irradiation, creates a nanostructured material with a unique composition and morphology, as revealed by electron microscopy, tomography, and elemental analysis. A combination of basic plasmonic and nanophotonic materials such as gold and silicon within a single microsphere allows for efficient light-to-heat conversion, as well as single-particle SERS sensing with temperature-feedback modality and expanded functionality. Moreover, the characteristic Raman signal and hot-electron-induced nonlinear photoluminescence coexisting within the novel Au-Si hybrids, as well as the commonly criticized randomness of the nanomaterials prepared by laser ablation in liquid, were proved to be useful for the realization of anticounterfeiting labels based on a physically unclonable function approach.