No abstract

The knowledge of some mechanical properties of materials and their changes with thermal treatments and/or mechanical treatments are essential to obtain the best results during simulation of processes. In this paper, changes of Young's modulus at room temperature of colddeformed aluminum AA1050 carried out in a tension machine and changes of Young’s modulus and Poisson’s ratio of AA2024 (T6 and T65) have been determined. The elastics constants have been measured by the ultrasound technique in AA2024 alloy and by tensile test in AA1050. In this alloy, the Young's modulus (E) diminishes during the first step of deformation and then increases with the successive cold working. Changes in Young's modulus measured are around 6-8%. In AA2024, the Young's modulus change is about 3% between the annealed and quenched alloy (minimum value); during aging the E parameter increases with respect to quenching. These changes are correlated with the structural changes during thermal treatments. In AA2024, the E parameter remains almost constant during cold-working after the aging treatment. Poisson’s ratio of this alloy remains almost constant in all the treatments. These results are also correlated with the dislocations arrangement in both materials. This behaviour is also compared with cold-deformed pure iron in a tensile test. These results confirm that aluminum AA1050 present similar behaviour than it was observed for pure iron.

Resumen En trabajos anteriores se ha constatado que varios aceros al carbono hipoeutectoides, en estado de temple, presentan valores del módulo de Young inferiores a los correspondientes en estado de revenido. En todos los casos la determinación se ha realizado mediante ultrasonidos. En concreto, para el acero C22E (EN 10083), el módulo se incrementa ligeramente desde 209 GPa (material templado) hasta 211 GPa (revenido a 650 °C), para el acero C45E el módulo aumenta desde 199 GPa hasta 211 GPa (revenido a 500 °C) y para el acero C55E el módulo varía desde 202 GPa hasta 209 GPa para el acero revenido a 650 °C. El presente trabajo se centra en la caracterización estructural de los tres aceros mencionados a los distintos estados de tratamiento térmico, utilizando las técnicas de microscopía óptica de reflexión y microscopía electrónica de barrido, y se propone una explicación de la variación del módulo a partir del comportamiento de las dislocaciones y su interacción con átomos de soluto y con otras dislocaciones. Palabras clave Módulo de Young. Tratamiento térmico. Aceros al carbono. Ultrasonidos.

The information in the basic references about the relation between elastic constants and particularly Young’s modulus (E) behavior and plastic deformation indicates that this parameter is constant or almost constant. At the beginning of the XX century several authors indicated that E of some metals decreased when cold deformation increased and detected reductions up to 15% in steels, aluminum, copper, brass... In the last years this behavior is taking into account during the finite-element analysis of sheet metal stamping or other plastic deformation processes. This work includes an extensive review of papers of our research team and of other authors related with the behavior of Young’s modulus during plastic deformation of some metallic alloys. This parameter can diminish up to 10% by plastic deformation (tension test) in iron, aluminum, and stainless steel (UNS S 30403) but remains practically unaltered in aluminum alloys deformed before or after aging. Results of Young’s modulus in nanostructured copper and copper alloys determined by ultrasonic technique are also presented. Additional results of Young’s modulus of UNS G10180 and UNS G10430 steels measured during loading and unloading steps in tension test are also included. High differences in the E values were detected between both steps.