No abstract

2016) Synthesis of nanosized TiO 2 powder by sol gel method at low temperature, Molecular Crystals and Liquid Crystals, 627:1, 170-175, ABSTRACTNanotechnology is all about making products from very small constituents, components or subsystems to gain greatly enhanced material properties and functionality. Nanocrystalline anatase TiO 2 was prepared by a facile sol-gel route at a temperature of 50°C under mild conditions. Titanium tetraisopropoxide (TTIP) was used as a titanium precursor, and 2-propanol was used as a solvent. XRD, TEM, SEM, FT-IR and BET were applied to characterize the crystal phase. The Crystalline size of TiO 2 powder has been obtained with diameter < 30 nm for anatase at 500°C using an acid.

No abstract

Few studies focus on the co-valorization of river dredging sediments (DS) and residual waste glass (RWG) in alkali-activated binders. This study investigates the use of DS as an aluminosilicate source by substituting a natural resource (metakaolin (MK)), while using RWG as an activator (sodium silicate source). Suitable treatments are selected to increase the potential reactivity of each residue. The DS is thermally treated at 750 °C to promote limestone and aluminosilicate clays’ activation. The RWG (amorphous, rich in silicon, and containing sodium) is used as an alkaline activator after treatment in 10 M NaOH. Structural monitoring using nuclear magnetic resonance (29NMR and 27NMR), X-ray diffraction, and leaching is conducted to achieve processing optimization. In the second stage, mortars were prepared and characterized by determining compressive strength, water absorption, mercury porosimetry and Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS). Results obtained show the great advantage of combining RWG and DS in an alkali-activation binder. The treated RWG offers advantages when used as sodium silicate activating solution, while the substitution of MK by calcined sediments (DS-750 °C) at 10%, 20%, and 30% leads to improvements in the properties of the matrix such as an increase in compressive strength and a refinement and reduction of the pore size within the matrix.