Recycling of construction and demolition waste and recycling of industrial by-products into building materials has an enormous potential. Brick waste can be treated by reusing for construction. Recently, the utilization of pozzolanic materials in cement and concrete have increased considerably due to their diverse benefits such as lesser use of cement , saving in production costs, improvement in the durability of concrete and so on. Ground bricks was added to concrete mix as partial replacement of cement at (5, 10, 15) % by weight. It was evaluated as a pozzolanic material in conjunction with high range water reducing admixture superplasticizer (HRWR)-The study confirmed that the use of 10 % of ground brick improved compressive, flexure strength of concrete by about (23.3%) and (5.92%) respectively at 240 days as compared to reference concrete and decreased the depth of water penetration under pressure by about 43.75% at 150 days, also the water absorption decreased by about 2.52%. The uses of 10% of grinding brick in conjunction with high range water reducing admixture reduced corrosion of steel reinforcement by about 18%.

In this work, microbubble dispersed air flotation technique was applied for cadmium ions removal from wastewater aqueous solution. Experiments parameters such as pH (3, 4, 5, and 6), initial Cd(II) ions concentration (40, 80, and 120 mg/l)  contact time( 2, 5, 10 , 15, and 20min), and surfactant (10, 20and 40mg/l) were studied in order to optimize the best conditions .The experimental results indicate that microbubbles were quite effective in removing cadmium ions and the anionic surfactant SDS was found to be more efficient than cationic CTAB in flotation process. 92.3% maximum removal efficiency achieved through 15min at pH 5, SDS surfactant concentration 20mg/l, flow rate250 cm3/min and at 40mg/l Cd(II) ions initial concentration. The removal efficiency of cadmium ion was predicted through 11 neurons hidden layer, with a correlation coefficient of 0.9997 between ANN outputs and the experimental data and through sensitivity analysis, pH was found to be most significant parameter (25.13 %).The kinetic flotation order for cadmium ions almost first order and the removal rate constant (k) increases with decreasing the initial metal concentration.

The application of advanced oxidation process (AOP) in the treatment of wastewater contaminated with oil was investigated in this study. The AOP investigated is the homogeneous photo-Fenton (UV/H2O2/Fe(+2)) process. The reaction is influenced by the input concentration of hydrogen peroxide H2O2, amount of the iron catalyst Fe(+2), pH, temperature, irradiation time, and concentration of oil in the wastewater. The removal efficiency for the used system at the optimal operational parameters (H2O2 = 400 mg/L, Fe(+2) = 40 mg/L, pH = 3, irradiation time = 150 min, and temperature = 30 °C) for 1,000 mg/L oil load was found to be 72%. The study examined the implementation of artificial neural network (ANN) for the prediction and simulation of oil degradation in aqueous solution by photo-Fenton process. The multilayered feed-forward networks were trained by using a backpropagation algorithm; a three-layer network with 22 neurons in the hidden layer gave optimal results. The results show that the ANN model can predict the experimental results with high correlation coefficient (R (2) = 0.9949). The sensitivity analysis showed that all studied variables (H2O2, Fe(+2), pH, irradiation time, temperature, and oil concentration) have strong effect on the oil degradation. The pH was found to be the most influential parameter with relative importance of 20.6%.

No abstract

Purpose The present study provided a comprehensive description regarding the application of a mixture of three nonliving classes of algae as a promising and inexpensive biosorbent for removing toxic nickel (Ni(II)) ions from the aqueous medium. Methods The biosorption process was tested by varying several experimental parameters such as pH (2-8), contaminant concentration (20-300 mg/L), biosorbent content (0.2-2 g/100 mL), and temperature (20-40 °C). In addition, the competition effects of the presence of Pb(II), Cu(II), and Zn(II) ions on the Ni(II) removal efficiency was studied by varying their concentrations from 30 to 40 mg/L. ResultsThe microscopic analysis of algae demonstrated that the used biosorbent consisted mainly of Chrysophyta (80%), Chlorophyte (14%), and Cyanophyta (6%). Results demonstrated that these environmental parameters influenced the removal efficiency with a different degree and there was no stable effects rank at conditions under examination. FT-IR and SEM analysis revealed that the biosorbent surface consists of many strong and active groups of negative valences such as hydroxyl and carboxyl groups, thus exhibiting several morphological properties of interest. Further, it was found that the Temkin model best fitted the isotherm biosorption data. The kinetic study showed that the Ni(II) biosorption was rapid within first 20 min of reaction time, thereby following a pseudo-second-order model, which in turn demonstrated a chemisorption process of Ni(II) ions reaction with the biosorbent binding sites. Also, the thermodynamic study suggested that the biosorption process of Ni(II) onto algal biomass was a spontaneous and endothermic in nature. The maximum uptake of Ni(II) was 9.848 mg/g under optimized conditions and neutral environment. Conclusions Thus, this significant finding suggested a favorable and eco-friendly treatment mechanism for removal of Ni(II) ions from aqueous medium via biosorption onto the used mixture of nonliving algal biomass.