Porous three-dimensional scaffolds provide a favorable environment for the regeneration of tissues and organs to recover the injured tissue in terms of structure and biological function. Proper design of scaffold architecture is a crucial factor for tissue engineering. The mechanical properties and performance of the scaffold depend on the scaffold architecture, material, and geometry. In this study, numerical analysis is performed on four types of gyroids to see the variation of effective elastic modules in three different directions. The fluid flow induces wall shear stress (WSS), considering the Newtonian fluid is also investigated. Initially, the WSS is evaluated through computational fluid dynamics simulation and compared to previous literature. A good agreement between the results of published literature and those initial works encourages dealing with several cases by varying different parameters. The effect of scaffold architecture, pore size, and flow direction on WSS is studied using 16 different gyroid models. A significant reduction of scaffold stiffness can be achieved with porosity, and WSS increases with a decrease in pore size. Inlet flow direction also has a good influence on WSS. Fluid flow perpendicular to the gyroid cross-sectional area gives maximum WSS and gradually decreases with an increase in direction angle. The present study can be used to reference a specific scaffold design in tissue engineering.

No abstract

No abstract

A suitable scaffold architecture is always desirable to get a favorable tissue response for bone tissue engineering. In this regard, a fluid-structure interaction analysis was carried out on different porous scaffolds to observe the in vitro mechanical responses due to fluid flow, followed by a submodeling method to obtain the cellular deformation and strain. Different types of scaffolds were designed based on different porosity and architecture. The cell was modelled with cytoplasm, nucleus, cell membrane, and cytoskeletons. The main objective of the study is to examine the variation of cellular responses due to different porosity and architecture of the scaffold. The results of this study highlight that permeability is higher in the case of gyroid structure and wall shear stress (WSS) is higher in the case of diamond structure. The permeability of all scaffolds increases with the increase of porosity. The opposite trend is shown in the case of WSS within scaffolds. The cell is showing higher deformation when it is placed on the front position of the scaffold towards the direction of fluid flow. This study will guide us in predicting an ideal scaffold for better cell growth.

Temporomandibular joint replacement (TMJR) is a surgical procedure that relies heavily on the biomechanical properties of the implant-bone interface for success. In this study, we investigated the effects of three commonly used implant screw thread designs (buttress, square, and triangle) on the biomechanical performance of the mandibular bone-implant construct, with the aim of improving osseointegration. Using finite element analysis, we simulated the mechanical behavior of the prosthesis and mandible and examined the biomechanics of the temporomandibular joint. We considered five coefficients of friction ranging from 0.1 to 0.5 in our analyses. Our hypothesis was that changing the screw thread shape while keeping the pitch, height, and depth constant could enhance the biomechanical environment at the peri-implant bone. Our results indicate that the square thread design produced the highest stress concentration, while the triangle thread design exhibited the most favorable distribution of stress around the implant. Furthermore, increasing the coefficient of friction led to an increase in stress concentration in the implant and surrounding bone. Our findings offer valuable insights into the biomechanical performance of different screw thread designs in the mandibular bone-implant construct. They highlight the significance of considering screw thread shape and coefficient of friction in TMJR implant design. Future studies should incorporate the viscoelastic properties of bone to improve the accuracy of finite element analysis. This research contributes to the optimization of TMJR implants and ultimately enhances patient outcomes.