No abstract

The phenomenon of knock is an abnormal combustion occurring in spark-ignition (SI) engines and forms a barrier that prevents an increase in thermal efficiency while simultaneously reducing CO2 emissions. Since knocking combustion is highly stochastic, a cyclic analysis of in-cylinder pressure is necessary. In this study we propose an approach for efficient and robust detection and identification of knocking combustion in three different internal combustion engines. The proposed methodology includes a signal processing technique, called continuous wavelet transformation (CWT), which provides a simultaneous analysis of the in-cylinder pressure traces in the time and frequency domains with coefficients. These coefficients serve as input for a convolutional neural network (CNN) which extracts distinctive features and performs an image recognition task in order to distinguish between non-knock and knock. The results revealed the following: (i) The CWT delivered a stable and effective feature space with the coefficients that represents the unique time-frequency pattern of each individual in-cylinder pressure cycle; (ii) the proposed approach was superior to the state-of-the-art threshold value exceeded (TVE) method with a maximum amplitude pressure oscillation (MAPO) criterion improving the overall accuracy by 6.15 percentage points (up to 92.62%); and (iii) The CWT + CNN method does not require calibrating threshold values for different engines or operating conditions as long as enough and diverse data is used to train the neural network.

An optimal control of the combustion process of an engine ensures lower emissions and fuel consumption plus high efficiencies. Combustion parameters such as the peak firing pressure (PFP) and the crank angle (CA) corresponding to 50% of mass fraction burned (MFB50) are essential for a closed-loop control strategy. These parameters are based on the measured in-cylinder pressure that is typically gained by intrusive pressure sensors (PSs). These are costly and their durability is uncertain. To overcome these issues, the potential of using a virtual sensor based on the vibration signals acquired by a knock sensor (KS) for control of the combustion process is investigated. The present work introduces a data-driven approach where a signal-processing technique, designated as discrete wavelet transform (DWT), will be used as the preprocessing step for extracting informative features to perform regression tasks of the selected combustion parameters with extreme gradient boosting (XGBoost) regression models. The presented methodology will be applied to data from two different spark-ignited, single cylinder gas engines. Finally, an analysis is obtained where the important features based on the model’s decisions are identified.

No abstract

No abstract