We propose a new 3D-printed capillary gripper equipped with a textured surface for motion-free release of micro-objects. The release process can be controlled by IR laser. We also discuss the minimal conditions for release.

Capillary gripping is a pick-and-place technique that is particularly well-suited for handling sub-millimetric components. Nevertheless, integrating a fluid supply and release mechanism becomes increasingly difficult to manufacture for these scales. In the present contribution, two hybrid manufacturing procedures are introduced in which the creation of the smallest features is decoupled from the macro-scale components. In the first procedure, small scale features are printed directly (by two-photon polymerisation) on top of a 3D-printed device (through stereolithography). In the second approach, directional ultraviolet (UV)-illumination and an adapted design allowed for successful (polydimethylsiloxane, PDMS) moulding of the microscopic gripper head on top of a metal substrate. Importantly, a fully functional microchannel is present in both cases through which liquid to grip the components can be supplied and retracted. This capability of removing the liquid combined with an asymmetric pillar design allows for a passive release mechanism with a placement precision on the order of 3% of the component size.

In soft robotics, the ability to generate advanced kinematics is a necessary step toward any more sophisticated tasks such as microobject manipulation, locomotion, or configuration changes. To this end, herein, a modular voxel‐based methodology adaptable to any scale and with any soft transducer is presented. The methodology is implemented at the micrometer scale with a one‐step fabrication process. An innovative gray‐tone lithography method using the two‐photon polymerization of photosensitive poly(N‐isopropylacrylamide) hydrogel is developed to print the voxels. Bending, compression, and twisting voxels are designed, printed, and characterized. A voxel consists of an isotropically shrinking active material reinforced adequately with a passive pattern. Each elementary voxel deforms along one degree of freedom and is a building block for superstructures able of advanced kinematics. With a side length of 40 μm, the bending voxel achieves a bending angle of 25º or curvature of . The compression voxel reaches an actuation strain of 40%, and the twisting voxel bends up to 18º. Advanced kinematics are demonstrated by printing complex structures composed of multiple elementary voxels. Herein, a foundation toward soft microrobots capable of performing complex tasks is constituted.