Textile materials produced from a high tenacity industrial polyester fiber are most widely used in the mechanical rubber goods industry to reinforce conveyor belts, tire cords, and hoses. Reinforcement of textile rubber undergoes a vulcanization process to adhere the textile materials with the rubber and to enhance the physio-mechanical properties of the product. The vulcanization process has an influence on the textile material being used as a reinforcement. In this work, the effects of aging temperature and time on the high tenacity polyester yarn’s mechanical and surface structural properties were investigated. An experiment was carried out on a pre-activated high tenacity polyester yarn of different linear densities, by aging the yarn specimens under various aging temperatures of 140, 160, 200, and 220 °C for six, twelve, and thirty-five minutes of aging time. The tensile properties and surface structural change in the yarns pre- and post-aging were studied. The investigation illustrates that aging time and temperature influence the surface structure of the fiber, tenacity, and elongation properties of the yarn. Compared to unaged yarn, an almost five times higher percentage of elongation was obtained for the samples aged at 220 °C for 6 min, while the lowest tenacity was obtained for the sample subjected to aging under 220 °C for 35 min.

Textile-reinforced conveyor belts are most widely used in various industries, including in the mining, construction, and manufacturing industries, to transport materials from one place to another. The conveyor belt’s tensile strength, which primarily relies on the property of the carcass, determines the area of application of the belt. The main aim of the current work was to investigate the influence of vulcanization temperature and duration of the vulcanization process on the tensile properties of the carcass part of the conveyor belt. An extensive experiment was carried out on the tensile properties of woven fabrics that were intended to reinforce conveyor belts by aging the fabrics at the temperature of 140 °C, 160 °C, and 220 °C for six and thirty-five minutes of aging durations. Afterward, the textile-reinforced conveyor belts were produced at vulcanization temperatures of 140 °C, 160 °C, and 220 °C for six and thirty-five minutes of vulcanizing durations. The influence of the vulcanization process parameters on the tensile property of fabrics utilized for the reinforcement of the conveyor belt was analyzed. In addition, the effect of the dipping process of woven fabric in resorcinol–formaldehyde–latex on the tensile property of polyester/polyamide 66 woven fabric (EP fabric) was investigated. The investigation results revealed that the tensile strength of the carcass of the conveyor belt was significantly affected by vulcanization temperature. The conveyor belt vulcanized at 160 °C for 35 min has shown the optimum tensile strength, which is 2.22% and 89.06% higher than the samples vulcanized at 140 °C and 220 °C for 35 min, respectively. Furthermore, the tensile strength and percentage elongation at break of conveyor belts vulcanized at 220 °C were almost destroyed regardless of the vulcanization duration.