Summary Enhancing distribution system operation accomplished with the integration of renewable energy resources (RERs) has several technical, economical, and environmental dimensions. In this regard, this paper presents an optimal integration procedure of Distributed Generation (DG) based on Photovoltaic panel (PV) and Distribution Static Compensator (DSTATCOM) in Electrical Distribution System (EDS). The proposed procedure is formulated as a multi‐objective function (MOF). The considered objectives that reflect the technical, economic, and environmental issues, are Active Power Loss Level (APLL), Short Circuit Level (SCL), Voltage Deviation Level (VDL), Net Saving Level (NSL), and Environmental Pollution Reduction Level (EPRL). The proposed procedure investigates several hybrid optimization methods that combine the firefly algorithm (FA) with various acceleration coefficients PSO algorithms to improve the overall solution quality of the hybrid algorithms compared with the individual algorithms. To prove the capability of the proposed procedure, four different cases are tested on IEEE 33‐bus and 69‐bus EDSs. Added to that, the proposed algorithms are extended to practical Algerian EDS in Adrar City 205‐bus. Results obtained by the hybrid FA‐SCAC‐PSO algorithm showed that the simultaneous allocation of multiple DG and DSTATCOM in all standard and practical test systems significantly reduces the loss and enhances the voltage profile. An energy‐efficient analysis to proceed for different cases studied based on the best hybrid FA‐SCAC‐PSO algorithm to reach the best value of MOF compared to other algorithms, moreover the capability to achieve the optimal allocation of DG and DSTATCOM by maintaining the voltages profile within the permissible limit, whatever the variation of load. Significant technical economic and environmental achievements are found for different case studies especially in the existence of DGs and DSTATCOM devices.

The energy management system (EMS) of an electrical distribution system (EDS), with the integration of distributed generation (DG) and distribution static compensator (DSTATCOM), provides numerous benefits and significantly differs from the existing EDSs. This paper presents an optimal integration of DG based on photovoltaic (PV) solar panels and DSTATCOM in EDS. A single objective function, based on maximizing the active power loss level (APLL) in EDS, is deployed to find the optimal size and location of photovoltaic DG and DSTATCOM simultaneously in different study cases using various particle swarm optimization (PSO) algorithms. These PSO algorithms are the basic PSO, adaptive acceleration coefficients PSO (AAC-PSO), autonomous particles groups for PSO (APG-PSO), nonlinear dynamic acceleration coefficients PSO (NDAC-PSO), sine cosine acceleration coefficients PSO (SCAC-PSO), and time-varying acceleration PSO (TVA-PSO). These algorithms are applied to the standard IEEE 33- and 69-bus EDSs, which are used as test systems to verify the effectiveness of the proposed algorithms. Simulation results prove that the TVA-PSO algorithm exhibits higher capability and efficiency in finding optimum solutions. Comparing the simulation results attained for different study cases leads to the conclusion that DG and DSTATCOM were optimally-allocated simultaneously, which resulted in a significant reduction of power losses and an enhancement of the voltage profile.

The satisfaction of electricity customers and environmental constraints imposed have made the trend towards renewable energies making them more essential due to their advantages as reducing power losses and ameliorating system’s voltage profiles and reliability. This article addresses the optimal location and size of multiple distributed generations (DGs) based on solar photovoltaic panels (PV) connected to electrical distribution network (EDN) using the various proposed hybrid particle swarm optimization (PSO) algorithms based on chaotic maps and adaptive acceleration coefficients. These algorithms are implemented to optimally allocate the DGs based PV (PV-DG) into EDN by minimizing the multi-objective function (MOF), which is represented as the sum of three technical parameters of the total active power loss (TAPL), total voltage deviation (TVD), and total operation time (TOT) of overcurrent relays (OCRs). The effectiveness of the proposed PSO algorithms were validated on both standards IEEE 33-bus, and 69-bus. The optimal integrating of PV-DGs into EDNs reduced the TAPL percentage by 56.94 % for the IEEE 33-bus and by 61.17 % for the IEEE 69-bus test system, enhanced the voltage profiles while minimizing the TVD by 37.35 % and by 32.27 % for two EDNs, respectively.

No abstract

No abstract