A preliminary insight into metal cycling within the urban sewer was obtained by determining both the heavy metal concentrations (Cu, Zn, Pb, Cd, Ni, Cr) in sewage and sediments, and the nature of metal-bearing particles using TEM-EDX, SEM-EDX and XRD. Particles collected from tap water, sump-pit deposits, and washbasin siphons, were also examined to trace back the origin of some mineral species. The results show that the total levels in Cu, Pb, Zn, Ni, and Cr in sewage are similar to that reported in the literature, thus suggesting that a time-averaged heavy metal fingerprint of domestic sewage can be defined for most developed cities at the urban catchment scale. Household activities represent the main source of Zn and Pb, the water supply system is a significant source of Cu, and in our case, groundwater infiltration in the sewer system provides a supplementary source of Ni and Cd. Concentrations in heavy metals were much higher in sewer sediments than in sewage suspended solids, the enrichment being due to the preferential settling of metal-bearing particles of high density and/or the precipitation of neoformed mineral phases. TEM and SEM-EDX analyses indicated that suspended solids, biofilms, and sewer sediments contained similar heavy metal-bearing particles including alloys and metal fragments, oxidized metals and sulfides. Copper fragments, metal carbonates (Cu, Zn, Pb), and oxidized soldering materials are released from the erosion of domestic plumbing, whereas the precipitation of sulfides and the sulfurization of metal phases occur primarily within the household connections to the sewer trunk. Close examination of sulfide phases also revealed in most cases a complex growth history recorded in the texture of particles, which likely reflects changes in physicochemical conditions associated with successive resuspension and settling of particles within the sewer system.
The nature of trace element carriers contained in sewage and combined sewer overflow (CSO) was investigated by TEM-EDX-Electron diffraction and SEM-EDX. During dry weather, chalcophile elements were found to accumulate in sewer sediments as early diagenetic sulfide phases. The sulfurization of some metal alloys was also evidenced. Other heavy metal carriers detected in sewage include metal alloys, some iron oxihydroxide phases and neoformed phosphate minerals such as anapaite. During rain events, the detailed characterization of individual mineral species allowed to differentiate the contributions from various specific sources. Metal plating particles, barite from automobile brake, or rare earth oxides from catalytic exhaust pipes, originate from road runoff, whereas PbSn alloys and lead carbonates are attributed to zinc-works from roofs and paint from building siding. Soil contribution can be traced by the presence of clay minerals, iron oxihydroxides, zircons and rare earth phosphates. However, the most abundant heavy metal carriers in CSO samples were the sulfide particles eroded from sewer sediments. The evolution of relative abundances of trace element carriers during a single storm event, suggests that the pollution due to the "first flush" effect principally results from the sewer stock of sulfides and previously deposited metal alloys, rather than from urban surface runoff.
Degradation of phenanthrene by Pseudomonas aeruginosa AK1 was examined in (i) an aqueous mineral salts medium to which phenanthrene particles of varying size (i.e. diameter) were added, and (ii) an aqueous/organic biphasic culture system consisting of mineral salts medium supplemented with 2,2,4,4,6,8,8-heptamethylnonane (HMN) as the phenanthrene-carrying organic phase. In both systems, the rate of phenanthrene biodegradation could be significantly enhanced by manipulations leading to improved phenanthrene mass transfer into the aqueous phase. With crystalline phenanthrene, the rate of biodegradation was found to be directly correlated to the particle surface area, whereas in the biphasic system the rate of biodegradation of the dissolved phenanthrene was mainly governed by the HMN/water interface area. In the latter system, exponential growth with a doubling time td of 6-8 hours has been achieved under conditions of intensive agitation of the medium indicating that phenanthrene degrad ation by strain AK1 is limited mainly by physicochemical parameters. Addition of selected surfactants to the culture medium was found to accelerate phenanthrene degradation by strain AK1 only under conditions of low agitation (in the presence of HMN) and after pretreatment of phenanthrene crystals by ultrasonication (in the absence of HMN). Evidence is presented that the stimulating effect of the surfactants was primarily due to improved dispersion of phenanthrene particle agglomerates (in the aqueous mineral salts medium supplemented with phenanthrene crystals) or of the phenanthrene-carrying lipophilic solvent drops (in the aqueous/organic biphasic culture system) whereas the solubilizing activity towards phenanthrene was neglectible. Under conditions of intensive mixing of the culture medium (i.e. if a high particle surface area of HMN/water interface area, resp., is provided), the addition of surfactants did not enhance phenanthrene biodegradation
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.