There is a recognized and growing need for rapid and efficient cell assays, where the size of microfluidic devices lend themselves to the manipulation of cellular populations down to the single cell level. An exceptional way to analyze cells independently is to encapsulate them within aqueous droplets surrounded by an immiscible fluid, so that reagents and reaction products are contained within a controlled microenvironment. Most cell encapsulation work has focused on the development and use of passive methods, where droplets are produced continuously at high rates by pumping fluids from external pressure-driven reservoirs through defined microfluidic geometries. With limited exceptions, the number of cells encapsulated per droplet in these systems is dictated by Poisson statistics, reducing the proportion of droplets that contain the desired number of cells and thus the effective rate at which single cells can be encapsulated. Nevertheless, a number of recently developed actively-controlled droplet production methods present an alternative route to the production of droplets at similar rates and with the potential to improve the efficiency of single-cell encapsulation. In this critical review, we examine both passive and active methods for droplet production and explore how these can be used to deterministically and non-deterministically encapsulate cells.

In single-cell analysis, cellular activity and parameters are assayed on an individual, rather than population-average basis. Essential to observing the activity of these cells over time is the ability to trap, pattern and retain them, for which previous single-cell-patterning work has principally made use of mechanical methods. While successful as a long-term cell-patterning strategy, these devices remain essentially single use. Here we introduce a new method for the patterning of multiple spatially separated single particles and cells using high-frequency acoustic fields with one cell per acoustic well. We characterize and demonstrate patterning for both a range of particle sizes and the capture and patterning of cells, including human lymphocytes and red blood cells infected by the malarial parasite Plasmodium falciparum. This ability is made possible by a hitherto unexplored regime where the acoustic wavelength is on the same order as the cell dimensions.

This paper analyzes an indoor positioning system that uses white lighting LEDs. Modulated signals transmitted by the LEDs are used as the basis of time-of-arrival-based distance estimation. The theoretical limits on the accuracy of estimation are calculated by deriving the Cramer-Rao bound for intensity modulated windowed sinusoidal signals. Calculations for a typical indoor scenario, assuming perfect synchronization between transmitter and receiver, but using realistic values for other parameters show that very accurate distance estimates are achievable, with typical errors being in the order of centimeters depending on the frequency and power of the sinusoidal signals, the distance from the LED and the properties of the LED and the photoreceiver.Index Terms-Cramer-Rao bound, indoor localization, intensity modulation and direct detection, ranging, time-of-arrival, visible light communication, windowed sinusoid.