Silica fume (SF) is a mineral additive that is widely used in the construction industry when producing sustainable concrete. The integration of SF in concrete as a partial replacement for cement has several evident benefits, including reduced CO2 emissions, cost-effective concrete, increased durability, and mechanical qualities. As environmental issues continue to grow, the development of predictive machine learning models is critical. Thus, this study aims to create modelling tools for estimating the compressive and cracking tensile strengths of silica fume concrete. Multilayer perceptron neural networks (MLPNN), adaptive neural fuzzy detection systems (ANFIS), and genetic programming are all used (GEP). From accessible literature data, a broad and accurate database of 283 compressive strengths and 149 split tensile strengths was created. The six most significant input parameters were cement, fine aggregate, coarse aggregate, water, superplasticizer, and silica fume. Different statistical measures were used to evaluate models, including mean absolute error, root mean square error, root mean squared log error and the coefficient of determination. Both machine learning models, MLPNN and ANFIS, produced acceptable results with high prediction accuracy. Statistical analysis revealed that the ANFIS model outperformed the MLPNN model in terms of compressive and tensile strength prediction. The GEP models outperformed all other models. The predicted values for compressive strength and splitting tensile strength for GEP models were consistent with experimental values, with an R2 value of 0.97 for compressive strength and 0.93 for splitting tensile strength. Furthermore, sensitivity tests revealed that cement and water are the determining parameters in the growth of compressive strength but have the least effect on splitting tensile strength. Cross-validation was used to avoid overfitting and to confirm the output of the generalized modelling technique. GEP develops an empirical expression for each outcome to forecast future databases’ features to promote the usage of green concrete.

High temperature severely affects the nature of the ingredients used to produce concrete, which in turn reduces the strength properties of the concrete. It is a difficult and time-consuming task to achieve the desired compressive strength of concrete. However, the application of supervised machine learning (ML) approaches makes it possible to initially predict the targeted result with high accuracy. This study presents the use of a decision tree (DT), an artificial neural network (ANN), bagging, and gradient boosting (GB) to forecast the compressive strength of concrete at high temperatures on the basis of 207 data points. Python coding in Anaconda navigator software was used to run the selected models. The software requires information regarding both the input variables and the output parameter. A total of nine input parameters (water, cement, coarse aggregate, fine aggregate, fly ash, superplasticizers, silica fume, nano silica, and temperature) were incorporated as the input, while one variable (compressive strength) was selected as the output. The performance of the employed ML algorithms was evaluated with regards to statistical indicators, including the coefficient correlation (R2), mean absolute error (MAE), mean square error (MSE), and root mean square error (RMSE). Individual models using DT and ANN gave R2 equal to 0.83 and 0.82, respectively, while the use of the ensemble algorithm and gradient boosting gave R2 of 0.90 and 0.88, respectively. This indicates a strong correlation between the actual and predicted outcomes. The k-fold cross-validation, coefficient correlation (R2), and lesser errors (MAE, MSE, and RMSE) showed better performance than the ensemble algorithms. Sensitivity analyses were also conducted in order to check the contribution of each input variable. It has been shown that the use of the ensemble machine learning algorithm would enhance the performance level of the model.

Silica fume (SF) is a frequently used mineral admixture in producing sustainable concrete in the construction sector. Incorporating SF as a partial substitution of cement in concrete has obvious advantages, including reduced CO2 emission, cost-effective concrete, enhanced durability, and mechanical properties. Due to ever-increasing environmental concerns, the development of predictive machine learning (ML) models requires time. Therefore, the present study focuses on developing modeling techniques in predicting the compressive strength of silica fume concrete. The employed techniques include decision tree (DT) and support vector machine (SVM). An extensive and reliable database of 283 compressive strengths was established from the available literature information. The six most influential factors, i.e., cement, fine aggregate, coarse aggregate, water, superplasticizer, and silica fume, were considered as significant input parameters. The evaluation of models was performed by different statistical parameters, such as mean absolute error (MAE), root mean squared error (RMSE), root mean squared log error (RMSLE), and coefficient of determination (R2). Individual and ensemble models of DT and SVM showed satisfactory results with high prediction accuracy. Statistical analyses indicated that DT models bested SVM for predicting compressive strength. Ensemble modeling showed an enhancement of 11 percent and 1.5 percent for DT and SVM compressive strength models, respectively, as depicted by statistical parameters. Moreover, sensitivity analyses showed that cement and water are the governing parameters in developing compressive strength. A cross-validation technique was used to avoid overfitting issues and confirm the generalized modeling output. ML algorithms are used to predict SFC compressive strength to promote the use of green concrete.