No abstract

No abstract

Tunneling in urban areas, has raised the level of difficulty and challenge in respecting the constraints deriving from human presence and, therefore, the necessity for the study of geological and geotechnical properties and parameter, classification of the soils according to their engineering behavior, choosing the right TBM, determine groundwater level and determining possible geological hazards. In this paper some geological and geotechnical study took place along the tunnel route. This investigation is done by the result of 73 machinery borehole and 32 manual borehole that took place in the process of studying the tunnel route and continued by the result of field tests and laboratory tests and according to the result, the geological zone classified in 6 zone in tunnel route; due to the result of Cerchar abrasivity test and since Alluvial soil is the main soil in most of the tunneling route, the excavation soil classified as highly abrasive. In some part of tunnelling there is a risk of clogging due to the high amount of clay. Based on the results of Lofran tests the permeability of most of the classified soils in route of the tunnel was obtained less that 10E-7 m/s.

Static and quasi-static stability analysis of embankment dams is of vital importance in different stages of dam’s design, construction and operation. The stability can be studied using different techniques which are generally analyzed through Limit Equilibrium Method. Base on this main method, the critical slip surface is selected and the shear strength required to counter the slip at the selected surface is obtained and compared with shear strength of the soil at that surface in order to obtain confidence coefficient. In the present research, the Geo-studio Slope/w software that is a geotechnical software based on finite element method and is widely used in geotechnical field, is employed in order to analyze the stability of the body and foundation of Narmab dam in Golestan province. Narmab dam is a homogeneous embankment dam with a height of 60 m, crest length of 807 m and reservoir volume of 115 million cubic meters. The confidence coefficients provided by the software are compared to the permissible confidence coefficients. Moreover, the sensitivity of the confidence coefficients values to the changes in the effective factors, adhesion and internal friction coefficient, is analyzed. The analyses were performed on 8 values (±5, ±10, ±15, ±20) of c and φ and the obtained values of confidence coefficients were compared. In addition, a comparison was made between different methods of stability analysis. According to the static and quasi-static conditions, Narmab dam is stable in all loading stages (End of Construction, First Impounding and Steady State Seepage and In general, only for the static conditions of the end of construction stage, the sensitivity of adhesion is greater than the angle of internal friction, but, in other conditions and stages, the sensitivity of friction angle has more effects.

No abstract